Britax Car Sea User Manual - Page 9
Browse online or download pdf User Manual for Car Seat Britax Car Sea. Britax Car Sea 17 pages. Britax car seat user guide
Print Page
P2219_R02f.qxd
11/7/2002
Installation
A
B
C
14
10:23 AM
Page 16
Lap Belt Installation
Figure A illustrates a typical lap belt
configuration.
1
Insert recline bar into holes on
rear of restraint (See page 18).
2
Place the child restraint in a
forward facing position on the
vehicle seat.
3
Pull the vehicle belt out, then pass
the vehicle belt through the first belt
slot, from the front of the restraint to
the rear (Fig. B).
4
Route the vehicle belt around
the back of the restraint then
through the second belt slot,
from the rear of the restraint to
the front (Fig. C).
5
Verify that the vehicle belt is
not twisted, then buckle. (Fig. D).
6
Push restraint into the vehicle
seat with your full weight while
removing all slack from the vehicle
belt (Fig. E).
7
Verify that the vehicle belt is
tight and the child restraint is
secure.
Installation can be improved by the
use of the Versa-Tether
™
(see
pages 16–17).
IMPORTANT:
Always use the
Versa-Tether
for
children
weighing more than 50 pounds
(22.6 kg).
Removal
To remove the child restraint,
unfasten the vehicle belt and
reverse the above directions.
Installation
D
E
15