Gamut MinenT M3 User Manual - Page 3

Browse online or download pdf User Manual for Speakers Gamut MinenT M3. Gamut MinenT M3 8 pages. Minent

Print Page

Spike adjustment: The new Spike system is

designed to penetrate heavy carpeting, by using a

sharply shaped center Spike. The Spike is locked

by the outer Knob. Loosen the knob counter

clockwise to allow adjustment of the Spike. Use

an Allen key (Unbrako), size 6 mm, to adjust the

spike. Adjust the spikes to have an even weight

distribution (same slight resistance when turning

the key) to eliminate movement of the speaker.

When the Speaker is positioned in its desired posi-

tion turn the outer Knobs Clockwise by hand, until

they lock, to lock the spikes.

Connections

Connecting to the ampli er:

The newly designed proprietary GamuT Terminals

are made to allow the use of 3 different connec-

tions: 8mm spades, 4 mm banana plugs or

stripped wire (Bi-wire only). The terminals come

with a connector bracket to connect the two pairs

of terminals. The upper pair is input for the

Tweeter, the lower pair is input for the Mid/

Woofer section. To optimize for Bi-wiring re-

move the bracket by removing the terminal nuts.

(The positive input is on the right hand side viewed

from the back). Connect your speaker cable to the

speaker before connecting to the ampli er.

For single wire connection we recommend

using the + input for the tweeter (upper right

terminal) and the – input for the Mid/Woofer

(lower left terminal).

When using Banana plugs insert the plugs

in the center hole, make sure the t is as tight

as possible.

When using a Spade, loosen the desired

terminal nut and insert the spade between the

terminal and the bracket (single wire use).

When using a stripped wire remove the

terminal nut and insert the stripped wire into

it. Position the stripped wire onto the conical

part of the terminal base and re-position the

terminal nut onto the thread and turn the nut

until it locks the wire.

inenT User manual – M3, M5 & M7 Speakers