Gamut MinenT M7 User Manual - Page 4

Browse online or download pdf User Manual for Speakers Gamut MinenT M7. Gamut MinenT M7 8 pages. Minent

Print Page
Optimizing
the sound
1. Running in (breaking in):
Running in (breaking in): Speakers are electro
mechanical devices. As any mechanical device
a speaker needs running in before it reaches its
optimum performance level. During the develop-
ment phase we have carefully aligned and trimmed
all components to have a perfect balance when
fully run in, so please allow for the speaker to have
a run in period of up to 200 Hours of music play-
ing and an ageing of minimum 6 months before
they reach their optimum performance. During the
run in period the nal positioning of the speaker
cannot be determined as the bass character will
change. Please also allow time for the mid and
tweeter character to fall into place.
Example
Measurements Results
Example width
5 meters
Example length
7meters
Your measurements
Measurements Results
Your measured
width – write here
Your measured
length – write here
4
4
M
inenT User manual – M3, M5 & M7 Speakers
®
2. Advanced setup:
Divided
Divided
2 ×
by 7
by 5
divided
by 7
0,72
1,0
1,44
1,0
1,4
2,0
Divided
Divided
2 ×
by 7
by 5
divided
by 7
Positioning; Optimizing the Bass char-
acter & balance: Please go to the "Setting
Up" section to nd the minimum distances to
walls etc. and choose your way of setting up:
"Regular" or
"The Narrow Room" setup
A room has standing modes of energy.
The most harmful modes are positioned in
multiplications of 1/2 fractions of the room
dimensions, I.e. the position where the room
length, width and height is divided with 2, 4, 8,
16 etc. The obvious solution is to avoid these
positions by positioning the speaker in un-
even fractions of the room dimensions.
The preferred divisions of room dimen-
sions are: 1/3, 2/7, 1/5 & 1/7 see the diagram
below.
Divided
2 ×
by 3
divided
by 5
1,67
2,0
2,33
2,8
Divided
2 ×
by 3
divided
by 5
3 ×
divided
by 7
2,16
3,0
3 ×
divided
by 7