ENGLISH
Fan cooling
The refrigerator compartment is equipped
with a device that allows for a rapid cooling
of foods and more uniform temperature in
the compartment.
The activation of the fan cooling
function increases the energy
consumption.
1. Press Function (several times if
necessary) until the corresponding icon
appears.
The fan indicator flashes for a few seconds.
2. Press OK to confirm.
The fan indicator is shown.
To switch off the function repeat the
procedure until the fan indicator goes off.
If the function is activated
automatically, the fan indicator is
not shown (refer to 'Daily Use').
Drinks Chill function
The Drinks Chill mode is to be used to set an
acoustic alarm at the preferred time, useful,
for example, when you want to rapidly chill
food products for a certain length of time.
1. Press Function until the corresponding
icon appears.
The Drinks Chill indicator flashes.
The timer shows the set value (30 minutes)
for a few seconds.
2. Press the temperature colder button or
temperature warmer button to change
the Timer set value from 1 to 90 minutes.
3. Press OK to confirm.
Drinks Chill indicator is shown. The Timer
starts to flash (min).
At the end of the countdown the Drinks Chill
indicator flashes and an audible alarm
sounds.
4. Press OK to switch off the sound and
terminate the function.
It is possible to deactivate the
function at any time during
the countdown by pressing
Function until Drinks Chill
indicator flashes and then
pressing OK to confirm.
It is possible to change the
time during the countdown
and at the end by pressing
the temperature colder
button and the temperature
warmer button.
Child Lock function
To lock any possible operation through the
buttons select the Child Lock function.
1. Press Function until the corresponding
icon appears.
The Child Lock indicator flashes.
2. Press OK to confirm.
The Child Lock indicator is shown.
To switch off the function repeat the
procedure until the Child Lock function
indicator goes off.
Door open alarm
An acoustic alarm will sound when the door
is left open for around 5 minutes. This
condition is indicated by:
• flashing door open alarm indicator
• red display illumination
• beeping sound
Press Function to deactivate the acoustic
alarm. When normal conditions are
restored (door closed), the acoustic alarm
will stop.
11
Print Page