Airflow 90001461 Installation, Operation And Maintenance Manual - Page 12

Browse online or download pdf Installation, Operation And Maintenance Manual for Heating System Airflow 90001461. Airflow 90001461 19 pages.

Print Page

80001028 – Issue 1 10/21

4.3 Mobility

The Purigo T series has feet at the base of the unit which provide stability and can be

individually raised or lowered in order to level the unit.

The electrical connection is made by plugging in the power cable to the side of the unit and

inserting the plug into a mains power socket. The black power switch on the side of the unit

will turn power on and off. Do not run the electrical connection through water using a cable

extender or any other cable. Ensure the plug and plug socket is safe and electrically secure

BEFORE operation or plugging in the unit. Never attempt to force the wrong plug type into

the power connection. Always check the plug is compatible with the product before

attempting to install.

The unit has adjustable feet. Adjust the unit only as far as necessary to level the unit,

extending the levelling feet more than necessary may cause the unit to vibrate and

cause noise!

To adjust the unit, make sure it is first positioned in the correct place with the minimum

clearances observed.

There are 2 nuts on each adjustable foot. One is accessible from outside (outside nut) and

located just above the foot and another is inside(inside nut) located inside the unit's bottom

cover. To raise the unit, turn the inside nuts clockwise and then tighten the outside nuts.

To lower the unit, turn the outside nuts clockwise and then tighten the inside nuts. To

access the nuts inside the unit, you may need to remove the filter temporarily.

Danger:

Risk of personal injury and equipment damage, make sure the

device is placed on a flat surface.

Use the bracket supplied with the assembly kit to fix the unit to the wall or a similar flat rigid

surface using the 2 fixing holes on the rear panel. Please ensure this is affixed to the unit

before attempting to work on it. If the unit is not properly secured to a surface it could

accidentally topple forwards and cause serious injury. Fixing to the wall also prevents the

unit from being deliberately knocked over.

Figure 4: Feet can be raised up and down for levelling