Green Force Hybrid User Manual - Page 15
Browse online or download pdf User Manual for Flashlight Green Force Hybrid. Green Force Hybrid 17 pages. Modular lighting systems
Print Page- 1. Table of Contents
- 2. PWM Technology
- 3. Green Force Hybrid & TOS
- 4. Temperature Protection
- 5. End of Battery Life
- 6. Maintenance of Your Dive Light
- 7. Flexi Battery Packs
- 8. Hybrid Battery Packs
- 9. Using Your Green Force Dive Light
- 10. Controlling the Power
- 11. Green Force Dynamic Power Management
- 12. Green Force Dynamic Beam
- 13. Diamond Backup Light
- 14. Depth Rating & Warranty
Charging the Diamond 600-18650
The Diamond 600-18650 runs on a single Lithium 18650 battery. This battery
should be installed with the + pole facing the light head of the Diamond (see in-
dication). Only use the charger supplied with the Diamond 18650 to charge this
battery. Insert the battery in the charger according to the marks on the charger.
While charging, the charging indicator light will turn red. When the battery is fully
charged, the charging indicator light will turn green.
Charging the Diamond 600-AA
The Diamond 600-AA runs on 3 AA sized batteries (Alkaline or rechargeable
NiMH). These batteries should be installed with the + pole facing the light head
of the Diamond (see indication). When using rechargeable NiMH batteries, read
and follow the guidelines provided by the NiMH battery supplier.
Diamond 600-AA
Green Force
Diamond 600 Backup Light
Using your Green Force Diamond 600
To switch on the Diamond 600-AA or 600-18650 dive light, screw the light head
into the battery pack (clockwise). To switch off the dive light, simply unscrew the
light head 1 turn.
Switching between modes (100%, 30%, 7%, strobe & SOS). To switch between
different modes, turn the dive light off and immediately back on. Every time the
dive light is switched off and back on, it will automatically pass on to the next
mode.
100%
off/on
off/on
SOS
15
switch on
switch off
30%
off/on
7%
off/on
strobe
off/on