DECODE PRM4 User Manual - Page 11

Browse online or download pdf User Manual for Radio Modems DECODE PRM4. DECODE PRM4 20 pages. 868mhz

Print Page

3.5 Jumpers

The jumpers are located on the printed circuit board of the PRM4 device. By altering
the state of the jumpers, the serial interface on DB9 port can be set.
Serial interface
RS-232C
RS-485 2-wire, no
termination
RS-485 2-wire, 120Ω
termination
RS-422/485 4-wire,
no termination
RS-422/485 4-wire,
termination 120Ω
RS-422/485 4-wire,
T termination 120Ω
RS-422/485 4-wire,
and R- termination 120Ω
The following figure illustrates the device's circuit board with the layout of the
jumpers.
The jumpers J1 and J2 are used to set the device into the firmware upgrade mode.
Otherwise, they ought to be in 2-3 state.
The layout of the jumpers on the printed circuit board
Radio modem PRM4 868MHz /User's manual V1.6 / 24.05.2011
State
Jumpers
1-2
J3, J4, J5, J6, J10
1-2
J11, J8
1-2
J11
1-2
J8, J9
R
1-2
J8
1-2
J9
T
1-2
2-3
2-3
2-3
2-3
2-3
2-3
2-3
11