Decofire Halo Series Assembly, Safety & Operating Instructions
Browse online or download pdf Assembly, Safety & Operating Instructions for Heater Decofire Halo Series. Decofire Halo Series 17 pages. Rapid reduction area heater
Print Page
– HALO RAPID INDUCTION AREA HEATER –
Assembly, Safety & Operating Instructions
This appliance is best assembled by two people.
Tools required for assembly:
Phillips Screwdriver.
Additional materials required for assembly:
7.5 KGS of sand and clean water (Sold
separately), to fill the ballast tank.
DÉCOFIRE
FOR OUTDOOR USE ONLY
THIS APPLIANCE IS DESIGNED AND APPROVED FOR
OUTDOOR USE ONLY
DO NOT USE THIS APPLIANCE INDOORS OR IN
AN UNVENTILATED AREA.
WARNING
THE GUARD IS FITTED TO THIS APPLIANCE TO
REDUCE THE RISK OF FIRE OR, INJURY FROM BURNS
AND NO PART OF IT SHALL BE REMOVED.
WARNING
Read instructions carefully. If the information in this
instruction manual is not followed exactly, a fire or
explosion may result causing property damage, personal
injury or loss of life.
Keep instructions in a safe place for future reference.
If you are assembling this unit for someone else, give this
manual to them to read.
WARNING
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS
APPLIANCE WHILE IT IS IN OPERATION.
DO NOT USE OR STORE FLAMMABLE MATERIALS
NEAR THIS APPLIANCE.
DO NOT PLACE ARTICLES ON OR AGAINST THIS
APPLIANCE.
DANGER
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame or ignition source
3. If odour continues, keep away from the appliance and
immediately call your local fire department
DANGER - CARBON MONOXIDE HAZARD
This appliance can produce carbon
monoxide, which has no odour.
Using it in an enclosed space can kill you.
Never use this appliance in an enclosed
space such as a tent, home, basement or
camper. Do not bring this appliance indoors.
Page 1