Gandy 24H13 Operator's Manual - Page 7

Browse online or download pdf Operator's Manual for Spreader Gandy 24H13. Gandy 24H13 8 pages. 24-inch variable rate spreader
Also for Gandy 24H13: Operator's Manual (8 pages), Operator's Manual (10 pages), Parts And Assembly Manual (19 pages)

Print Page

Model 24, 30, 36, and 42-inch Gandy Spreaders have snap-off stainless steel bottoms. In the chaiis, the term

"gauge settings" refers to the numbers stamped on the gauge of the adjustable, stainless steel bottom which comes

as standard equipment. The term "bottom number" refers to the size designation of the various fixed-rate bottoms

available for 24, 36, and 42-inch models.

Use this handy conversion chaii for setting Gandy spreaders. However, always check your rate of application to be

sure your formulation is the same as the one used in calibration. Refer to the calibration procedures on page 3 of

this manual. Remember atmospheric conditions alone can affect the flow of materials.

3.5

4.0

5.0

4.5

Gandy Spreaders, 24, 30, 36, and 42-inch models

SCOTT'S GAUGE SETTING NUMBERS

5.5

6.0

6.5

7.0

7.5

GANDY GAUGE SETTING NUMBERS

Calibration Notes

Calibration of

8.0

8.5

9.0

9.5

10.0 11.0 12.0 13.0 14.0 15.0 16.0