Gandy 36H12 Operator's Manual - Page 10
Browse online or download pdf Operator's Manual for Spreader Gandy 36H12. Gandy 36H12 10 pages. 24” & 36” spreaders
Also for Gandy 36H12: Operator's Manual (8 pages), Operator's Manual (8 pages)
Print Page
Optional Extra Equipment: (Ordered Separately)
Calibration Pans:
Calibration pan hangs under the spreader to catch
material for weighing to check application rates.
Part Number for 24" Spreader: 28248584
Part Number for 36" Spreader: 28368584
The Gandy Company warrants all material and workmanship on Gandy equipment delivered to be free
of defects for a period of 12 months from date of original purchase. Products used on a commercial, rental or
leased basis are warranted for 90 days. Any part or parts thought to be defective within these warranty periods
are to be returned through your servicing dealer or distributor to the Gandy Company's plant. Distributor or
dealer must receive authorization from Gandy Company to return items under warranty. An authorization
number will be issued and must be clearly visible on all packages returned to the factory. If found defective by
Gandy Company, replacement parts will be forwarded free of charge, prepaid. No service, labor charge or
expense on the equipment will be allowed unless such expense has been previously authorized in writing by
the Gandy Company. Serial number and model of the unit involved is required by the Gandy Company on all
warranty claims. Gandy Company policy is to improve products whenever it is practical to do so. It reserves the
right to make changes or add improvements at any time without incurring any obligation to make such changes
on products sold previously. This warranty does not apply to products altered or misused by users after the point
of manufacture.
This warranty against defects in material and workmanship is in lieu of all other warranties, expressed or
implied, and there are no other warranties of any kind whatsoever including, but not limited to, any
implied warranty of merchantability or fitness for any particular purpose. In no event shall the company
be liable for any incidental or consequential damages whether for breach of warranty, for breach or
repudiation of any other term or condition hereof, or for negligence, on the basis of strict liability, or for any
other reason.
Gandy Company
815 Rice Lake Street
Owatonna, MN 55060
Website:
www.gandy.net
Form 2436OM808-IP
Jigglers Packages:
Use with materials that bridge.
When installed, Jigglers contact the rotor bar and
move up and down to help maintain an even flow.
Part Number for 24" Spreader: J24
Part Number for 36" Spreader: J36
28248584
Limited Warranty
~ 8 ~
J36
Phone: 507-451-5430
800-443-2476
Fax: 507-451-2857
Email:
Printed in the USA