Green Gorilla ProLine User Manual - Page 13

Browse online or download pdf User Manual for Paint Sprayer Green Gorilla ProLine. Green Gorilla ProLine 20 pages. Industrial system

Print Page

PowerPack Charging

This unit is equipped with the latest in lithium ion power technology. Ensure that

you are only using the Green Gorilla 110Vac charger that came with this unit. The

charger has been matched to the solid state electronics within the PowerPack itself

to ensure safe and reliable charging.

IMPORTANT! A safety interlock system incorporated into this system will not allow

the PowerPack to operate when the charger plug is engaged.

The wall charger is equipped with an indicator light that indicates when your system

is fully charged. The indicator light (as shown in Figure 30) is red during charging

periods and turns green when the lithium ion cells are fully charged. The following

steps should be used when charging your PowerPack.

1. Insert the Green Gorilla standard wall charger into a 110 Vac wall outlet.

2. Locate the charging port cover on your PowerPack X. The charging port cover is

located on the right side of the PowerPack as shown in Figure 31.

3. The charging port is protected by a ip open cover. Gently pull up on the tab to

expose the charging port.

4. Firmly insert the wall charger plug into the port.

5. The wall charger indicator light will turn green when the lithium ion cells are fully

charged. Charge time is approximately 3-5 hrs.

6. After fully charging, remove the charger plug from the PowerPack charging port

and push the protective cover back into place.

7. Ensure that the PowerPack X battery level indicator shows green when the unit is

turned on.

IMPORTANT! If the PowerPack fails to turn on after charging, pull back the

protective cover and gently reinsert. A built-in safety interlock system that

prevents usage while charging may have become engaged due to over- insertion

of the protective cover.

Indicator

Light

g. 30

g. 31

Pg. 12