KitchenAid KECD865HWH2 Installation Instructions Manual - Page 2
Browse online or download pdf Installation Instructions Manual for Cooktop KitchenAid KECD865HWH2. KitchenAid KECD865HWH2 8 pages. 36" electric built−in downdrdaft cooktop
Also for KitchenAid KECD865HWH2: Parts List (4 pages)
Print Page
Before you start,,,
Your safety and the safety of
others is very important.
We have provided many important
safety messages in this manual and
on your appliance. Ah_iays read and
obey all safety messages.
This is the safety alert
symbol.This symbol alerts
you to hazards that can kill
or hurt you and others. All safety
messages will be preceded by the
safety alert symbol and the word
"DANGER" or "WARNING". These
words
mean:
You witi be killed or seriously
injured if you don't foltow
instructions.
You can be killed or seriously
injured if you don't foltow
instructions.
All safety messages will identify the
hazard, tell you how to reduce the
chance of injury, and tell you what
can happen if the instructions are
not followed.
Important:
Observe
all governing
codes
and ordinances.
Failure
to meet
codes
and ordinances
could
lead to
fire or electrical
shock.
To eliminate
the risk of burns
by
reaching
over heated
surface
units,
cabinet
storage
space
located
above
the surface
units should
be avoided,
tf
cabinet storage is to be provided, the
risk can be reduced by instalJing a
range hood that projects horizontaJiy a
minimum of 5 inches (12.7 am) beyond
the bottom of the cabinets.
Proper installation is your responsibility.
o Make sure you have everything
necessary for correct installation.
o Have a qualified technician
install
this cooktop.
• Comply with the electrical specifications
on the model/serial rating plate.
Model/serial rating plate is located on
the bottom of the cooktop. Write both
numbers down on the front cover now
before installing cooktop.
Downdraft cooktop location should be
away from strong draft areas, such as
windows, doors and strong heating vents
or fans. Locate cooktop for convenient
use in kitchen.
Grounded electrical system is required=
See "Electrical requirements," Page 6=
Venting system must terminate
outdoors.
AH openings
in the wall or floor
where
cooktop
is to be installed
must be
sealed.
tt is the customer's
responsibility
to
contact
a qualified
electrical
installer,
to make sure that the electrical
installation
is correct,
and to make
sure
the electrical
installation
follows
the National
EJectrical
Code,
ANSJ/NFPA
70 -- latest edition*,
or
CSA Standards
C22.1=94, Canadian
EJectrical
Code, Part 1 and C22.2 No.
0-M91 = latest edition**,
and aH local
codes
and ordinances.
WARNING: To reduce the risk of fire,
electric shock, or injury to persons,
observe the following:
installation work and electrical wiring
must be done by qualified person(s) in
accordance with all applicable codes
and standards, including fire-rated
construction.
Sufficient air is needed for proper
combustion and exhausting of gases
through the flue (chimney) of fuel
burning equipment to prevent back
drafting. Follow the heating equipment
manufacturer's guideline and safety
standards such as those published by
the American Society for Heating,
Refrigeration and Air Conditioning
Engineers (ASHRAE), and the local
code authorities.
When cutting or drilling into wall or
ceiling, do not damage electrical wiring
and other hidden utilities.
Ducted fans must always be vented to
the outdoors.
WARNING: To reduce the risk of fire,
use only metal ductwork.
This downdraft eooktop is Not approved
for use in mobile homes.
Copies of the standards listed may be
obtained from:
* National
Fire Protection
Association
Batterymareh
Park
Quincy,
Massachusetts
02269
** Canadian Standard Association
178 Rexdale Boulevard
Etobicoke, (Toronto), Ontario Mgw 1R3
Toolsand materials neededfor installation:
PhHHps
_, pliers ji
screwdriver
//
._
:_:_
safety
\_ ;_'Y
.:j
glasses
.... _
snips
, _'_
Partssupplied:
* literature
pack
* vent
cover
* glass cleaner
Not shown:
. wall
or roof cap {not supplied)
. metal
vent
. twist=on
connectors
and 1/2" UL=iisted
conduit
connecter,
Number
and size will
depend
on your
installation.
See "E_eetriea_ connection,"
Page 7.