decon INFM7002 Assembly Instructions Manual - Page 6

Browse online or download pdf Assembly Instructions Manual for Wheelchair decon INFM7002. decon INFM7002 8 pages. Infinity mounting set panthera s3/u3/u3 light/u3 light l

Print Page

Mounting set

INFM7002, INFM7102, INFM7202

__________________________________________________________________________________

Now use the leveling tool that is included in the

delivery of Infinity. Since the adapter bar have splines

inside it will not be possible to get the bubble of the

spirit level exactly right. Just choose the most correct

position.

The leveling tool has two marks "H" and "L". When the

bubble of the spirit level is towards the "H" the castors

of the wheelchair will lift higher from the ground

compared to if the bubble of the spirit level is towards

the "L".

Adjustment of the angle can be done in two different manners. Both is descriped bellow.

Alt.1

Using the adjustment tool that is

included in the delivery of Infinity (not

this mounting set), set the angle of

the adaptorbar so that the spirit level

is in level. Inside the pipes there are

splines so when rotating you will feel

and hear a clicking. When desired

angle have been accomplished, check

that the center pipe is centered in the

wheelchair. Now tighten the screws in

the clamps (C).

WARNING!

The screws holding the clamps (C)

shall be tightened to 7-9Nm of torque.

__________________________________________________________________________________

Page 6/8