Green image GC-1009-4V1 Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for Receiver Green image GC-1009-4V1. Green image GC-1009-4V1 3 pages. Receiver for rgbw remote & wifi
Also for Green image GC-1009-4V1: Manual (3 pages)
Print Page
Wiring Diagrams
Operation
Learning Process (Matching)
a) Ensure wiring is according to connection diagram.
b) Wake up the remote control by touching ON/OFF button.
c) Press learning button on receiver.
d) Touch any zone button on remote control.
e) Touch colour wheel.
f) Connected LED light will blink to confirm zone designation.
g) Press learning button on receiver for 5 seconds until LED light flash, this deletes the learned ID.
NOTE 1: To choose a master from slaves by jumper for each zone. Short circuit for master. Open circuit for slave. Each zone can
only set one master controller. After a period of time, the master will run synchronization operations to keep the same color or
mode of all slaves in one zone.
NOTE 2: Each remote controls 8 zone (areas) receivers, each area can be save (learn) as many receivers as desired.
Each receiver can be controlled by a maximum of 8 different remote controllers.
greenimagetech.com
105 8288 N Fraser Way
Burnaby BC, V3N 0E9
© Green Image Tech, LTD. All rights reserved. We reserve the right to change design, materials
T: (604) 207-9879
F: (604) 207-6992
and finish in any way that will not alter installed appearance or reduce function and performance.
Receiver for RGBW Remote & Wifi
GC-1009-4V1