Century Helicopter Products Predator 60/70 SE Instruction Manual - Page 17
Browse online or download pdf Instruction Manual for Toy Century Helicopter Products Predator 60/70 SE. Century Helicopter Products Predator 60/70 SE 20 pages.
Print Page
#HI6067
Horizontal
Fin
Insert the M3 socket screws through the top of the plastic fin
and through the top tail fin mount (straight ends). Notice that
the bottom fin mount is angled for comparison.
#HI6067A Carbon
Horizontal Fin
Insert the M3 socket screws through the top of the carbon
fin and through the top tail fin mount (straight ends).
Notice that the bottom fin mount is angled for comparison.
#M3x35 Socket Screws x 2
& M3 Locknuts x 2
Slide the bottom fin mount (taller side of angled ends
towards the mechanics) over the M3 screws and insert the
aluminum tail struts and secure with M3 locknuts.
#HI6068 Tail Fin
85
Mount Set
M3x35 Socket
Screws x 2
60/70 only.
87
#HI6068 Tail Fin
Mount Set
M3x40 Socket
Screws x 2
SE & Max 90
only.
89
Angled
bottom fin
mount
Long
#HI6067
Spacers x 2
Vertical Fin
M3x35 Socket
Screws x 2
Insert the M3 socket screws through the holes in the plastic
vertical fin. Slide the short spacers on the front bolts and the
long on the rear bolts. Slide the vertical fin mount on after
the short spacers.
#M3x40 Socket Screws x 2
& M3 Locknuts x 2
Slide the bottom fin mount (taller side of angled ends
towards mechanics) over the M3 screws and insert the
carbon tail struts and secure with M3 locknuts.
M3x12 Socket Screws x 2 &
M3 Locknuts x 2
Attach the struts (aluminum or carbon) to the main mechanics
using M3 socket screws, M3x9x3 plastic spacer on the outside
and secure with M3 locknuts on the inside of the frames.
Short
86
Spacers x 2
#HI6068
Vertical Fin
Mount half
M3x45 Socket
Screws x 2
88
Angled
bottom fin
mount
90
M3x9x3
Spacer x 2
17