Gantner Q Series Manual - Page 4

Browse online or download pdf Manual for Control Unit Gantner Q Series. Gantner Q Series 17 pages.

Print Page

1.1

1.2

1.3

Q.series

Gantner Instruments

Safety Information

Before starting installation, setting up, operation and before maintenance

work is carried out, it is essential to read and follow the appropriate

warning and safety information given in this manual.

Installation, setting up, operation and maintenance of the modules or

devices must take place as intended, i.e. under the conditions of use laid

down in this manual and in the technical data for the relevant module or

device.

The products in the Q.series range are intended for use in industrial and

experimental test engineering and for monitoring assembly and

production processes. Transducers (sensors) for the acquisition of physical

quantities such as voltage, current, resistance, temperature, force,

displacement, torque, mass, strain and pressure can be connected. The

modules are used exclusively for these kinds of measurement and control

applications. Any application which goes beyond this scope does not fall

within the intended use of the modules.

To ensure safe operation the modules and devices must only be operated

according to the details given in the manuals and technical data sheets. In

addition, the required legal and safety regulations covering the respective

application must be followed.

On receipt of the goods visually check that the packaging and the module

or device together with the data medium are intact. Also check the

shipment for completeness (accessory parts, documentation, auxiliary aids,

etc.). If the packaging has been damaged in transit or if you suspect that the

product is damaged or may mal- function, the product must not be put into

operation. In this case contact your customer consultant or Gantner

Instruments.

The installation, operation and maintenance of the modules or devices

must only be carried out by competent persons. Competent persons are

those who through their professional education have sufficient knowledge

in the required field and are familiar with the relevant national

occupational protection regulations, accident prevention regulations,

guidelines and accepted engineering rules. They must be able to reliably

assess the results of their work and must be familiar with the contents of