Green Leaf Workhorse Sprayers 3PT Series Assembly / Operation Instructions / Parts - Page 8
Browse online or download pdf Assembly / Operation Instructions / Parts for Paint Sprayer Green Leaf Workhorse Sprayers 3PT Series. Green Leaf Workhorse Sprayers 3PT Series 10 pages.
Print Page
Pump & Valve Assembly
Boom Hose Assembly
1
0
Wand Hose Assembly
ITEM
QTY
PART NUMBER
1
1
1
1
1
1
2
1
3
1
3
1
4
1
5
2
6
1
7
2
8
1
9
4
10
1
11
3
12
1
*Pump included depends upon model purchased.
The Lever adjusts the system pressure by
relieving liquid back to the tank. Adjusting
this lever will increase or decrease pressure
to both the spray wand and the spray boom.
The lever turns the spray
WORKHORSE SPRAYERS
, a division of Green Leaf, Inc. 9490 N BALDWIN ST FONTANET, IN 47851 www.workhorsesprayers.com 888-433-6631
®
5
7
2
PARTS LIST
DESCRIPTION
640451
2.2 GPM Pump
630201
4.0 GPM Pump
630031
5.0 GPM Pump
600289
Manifold Body
600291
Elbow (2.2 pumps)
600292
Elbow (4.0 & 5.0 pumps)
600129
Gauge 0-100 PSI
600216
Inline Valve
600287
600120
5/8" Hose Clamp
600288
1/2" Hose Clamp
600130
10-24 x 1.25 Screw
600213
Relief Hose Assembly
600315
Suction Hose Assembly
600298
Cap Assembly (not shown)
boom on and off
3
1
*
*
*
QD EL 12
4
6
8
9
1
1
Install Wand Hose Assembly onto
Swivel Barb Assembly, by placing a
Hose Clamp over the open end of the
hose on the Wand Hose Assembly.
Then pressing the open end of the
hose onto the Swivel Barb Assembly
like shown. Secure in place by
tightening the Hose Clamp as shown.
Wand Hose Assembly
Relief Hose Assembly
Boom Hose Assembly
if equipped
7