IKEA LEVERERA User Manual - Page 13

Browse online or download pdf User Manual for Hob IKEA LEVERERA. IKEA LEVERERA 20 pages.

Print Page

ENGLISH

What to do if...

Problem

The appliance cannot be

switched on or is not operat-

ing.

Acoustic signal sounds, ap-

pliance switches off.

The residual heat indicator is

not displaying anything.

There is no signal when you

touch the panel sensor fields.

symbol plus a number

appears on the heat setting

display.

If there is a fault, first try to find a solution to

the problem yourself. If you cannot find a

solution to the problem yourself, contact

your dealer or the After Sales Service.

Possible cause

The appliance is not connec-

ted to an electrical supply or

it is connected incorrectly.

More than 10 seconds

passed since you switched

on the hob.

The Child Safety Device or

the Lock is on

Several sensor fields were

touched at the same time.

One or more sensor fields

have been covered for lon-

ger than 10 seconds.

The cooking zone was only

on for a short time and is

therefore not hot.

The signals are deactivated. Activate the signals. Refer to

Electronics fault.

Remedy

Check if the appliance is cor-

rectly connected to the elec-

trical supply (refer to con-

nection diagram).

Switch the appliance on

again.

Deactivate the Child Safety

Device (See the section

"Child Safety Device" or

"Lock").

Only touch one sensor field.

Uncover sensor field.

If the cooking zone is sup-

posed to be hot, call the Af-

ter Sales Service.

OffSound Control.

Disconnect the appliance

from the electrical supply for

a few minutes. Take the fuse

out of the house's electric

system. If after switching on

again,

is displayed

again, call the After Sales

Service.