Gantom ST130 User Manual - Page 9

Browse online or download pdf User Manual for Spotlight Gantom ST130. Gantom ST130 15 pages.

Print Page

process until you have your desired projection size. At the maximum beam size, the primary and

secondary optics will be touching each other at about 1/4

of the length of the optic slider rails.

When you have the beam adjusted to the focal setting you would like, tighten down the set screws on

the primary and secondary optics. Complete the adjustment by screwing the barrel back onto the

fixture.

INSTALLING ACCESSORIES

A removable cutaway snoot for shielding the light source from view is available for the Storm Form.

Installing the snoot: The snoot can be adjusted or removed by loosening the three set screws that are

located toward the back of the snoot. You can then rotate the snoot to the appropriate position, and

finally tighten down all three set screws.

Storm Form and Storm Form DMX User Guide

Version 1.1 – 2/25/2021