Gantom iQ Warm White User Manual - Page 6

Browse online or download pdf User Manual for Projector Gantom iQ Warm White. Gantom iQ Warm White 7 pages.

Print Page

CONTROL SCREEN

o Address – This box shows the address that will be

assigned to the fixture if you hit the "Assign Address"

button

o Assign Address – Hitting this button will assign the

selected address to the fixture. The light fixture should

blink in response to having a new address assigned.

o Save button – this will allow you to save a settings

profile into the app. Use this if you need to configure

many fixtures to have the exact same settings. Please

note that this button DOES NOT save the current profile

or address to the fixture.

o Control Sliders – the control sliders will allow you to

set the intensity (brightness) of the light as well as the

speed of whichever pre-defined macro effect is selected.

Setting the "Speed" slider above 0% will start a strobe

effect with variable speed if no effect has been selected.

o Store as Default – hitting this will save the current

brightness and pre-defined macro effect to be the

default state for the light when it turns on. If the light

does not see DMX signal when it is powered on, it will go

to this state.

o Pre-Defined Macros – Selecting this button will bring

up a set of pre-made special effects like strobe, pulse,

and flicker.

Gantom iQ and iQx User Guide

Version 1.0 – 2/3/2017