IKEA BEMOTA Manual - Page 11

Browse online or download pdf Manual for Ventilation Hood IKEA BEMOTA. IKEA BEMOTA 37 pages. Wall mounted hood
Also for IKEA BEMOTA: Manual (20 pages), Manual (17 pages), Manual (8 pages), Manual (20 pages)

Print Page

ENGLISH

Care and cleaning

Use

• Switch off or unplug the appliance from

the mains supply before carrying out any

maintenance work.

• The top of the hood must not to be used

as a shelf.

• The extractor hood has been designed

exclusively for domestic use to eliminate

kitchen smells.

• Never use the hood for purposes other

than for which it has been designed.

• Never leave high naked flames under the

hood when it is in operation.

• Adjust the flame intensity to direct it onto

the bottom of the pan only, making sure

that it does not engulf the sides.

• Deep fat fryers must be continuously

monitored during use: overheated oil can

burst into flames.

Care and cleaning

• Grease filters must be cleaned every 2

months of operation, or more frequently

for particularly heavy usage, in order to

avoid a potential fire hazard, and can be

washed in a dishwasher.

• Clean the hood using a damp cloth and a

neutral liquid detergent.

Manufacturer

Ikea of Sweden AB - SE - 343 81 Älmhult, Sweden

Electrical connection

WARNING: All electrical connections must

be carried out by an authorised installer.

• Before making the connections, check that

the rated voltage of the appliance indicated

on the respective rating plate corresponds

to the power supply voltage.

Care and cleaning long life Charcoal filter

(Green)

• The anti-odour Filter can be washed

and regenerated every 3-4 months (or

more frequently if the hood is subject

to intensive use), up to a Max. of 8

regeneration cycles (in case of particularly

intensive use it is recommended that you

do not exceed 5 cycles).

Regeneration procedure:

• Wash in the dishwasher at a MAX

temperature of 70° or hand wash in hot

water without using abrasive sponges (do

not use detergents!).

• Dry in the oven at a MAX temperature

of 70° for 2 hours (it is recommended to

read carefully the user manual and the

assembly instruction of the oven of your

own).

Replacing the lamps

For Replacement please contact an

Authorized Service Center.

Warning Strips

Warning strips show that specialist should do the connecting water, gas and elect

Caution! Do not weld any of the cables!

The electric

specialist.