ENGLISH
9. Do step 7 again as necessary.
10. Press and hold
You can overwrite a memory position.
When the display shows the first free
memory position, use the shuttle and press
to overwrite an existing programme.
You can change the name of a programme
in the menu: Edit Programme Name.
Activating the programme
1. Turn on the oven.
2. Select the menu: Favourites.
3. Press
to confirm.
4. Select your favourite programme name.
5. Press
to confirm.
You can press
to go directly to menu:
Favourites.
Using the Child Lock
When the Child Lock is on, the oven cannot
be turned on accidentally.
If the Pyrolysis function works, the
door locks automatically.
A message comes on in the
display when you press any
symbol.
1. Press
to turn on the display.
2. Press
and
the display shows a message .
To turns off the Child Lock function repeat
step 2.
Function Lock
This function prevents an accidental change
of the heating function. You can turn it on
only when the oven works.
1. Turn on the oven.
2. Set a heating function or setting.
3. Press
again and again until the
display shows: Function Lock.
to save.
at the same time until
4. Press
to confirm.
If the Pyrolysis function works, the
door is locked and the symbol of
a key comes on in the display.
To turn off the function, press
display shows a message. Press
and then
to confirm.
When you turn off the oven, the
function also turns off.
Set + Go
The function lets you set a heating function
(or a programme) and use it later with one
press of any symbol.
1. Turn on the oven.
2. Set a heating function.
3. Press
again and again until the
display shows: Duration.
4. Set the time.
5. Press
again and again until the
display shows: Set + Go.
6. Press
to confirm.
Press any symbol (except for
function: Set + Go. The set heating function
starts.
When the heating function ends, a signal
sounds.
• Function Lock is on when the
heating function works.
• The menu: Basic Settings lets
you turn the function: Set + Go
on and off.
Automatic Switch-Off
For safety reasons the oven turns off
automatically after some time, if a heating
function works and you do not change any
settings.
23
. The
again
) to start the
Print Page