IKEA FORDELAKTIG Manual - Page 9

Browse online or download pdf Manual for Ventilation Hood IKEA FORDELAKTIG. IKEA FORDELAKTIG 32 pages.
Also for IKEA FORDELAKTIG: Manual (32 pages)

Print Page

1. Cleaning and Maintenance

ENGLISH

it. Do not drag pans or plates over the sur-

face.

Cabinet requirements

Installation

• The appliance is intended for recessed in-

stallation in the kitchen worktop above a

cabinet with a width of 600 mm or more.

• If the appliance is installed on flammable

materials, it is necessary to strictly comply

with the guidelines and regulations regard-

ing low voltage installations and fire pro-

tection.

• For fitted units, the components (plastic

materials and veneered wood) must be as-

sembled with heat-resistant adhesives

(min. 85 °C): Unsuitable materials and ad-

hesives can result in warping and detach-

ment.

• The kitchen cabinet must allow sufficient

room for the electrical connections of the

appliance. Suspended kitchen cabinets

above the appliance must be installed at a

distance that provides enough room for

comfortable working process.

• The use of hard wood decorative borders

around the worktop behind the appliance

is allowed, in this case the minimum dis-

tance remains as indicated on the installa-

tion illustrations.

• Positioning and dimensions of the cut-out

for built-in appliance is shown in the illus-

tration below. The measurements shown

are only valid if the following condition is

met: worktop overhang to cabinet front is

35 mm.

• Minimum distance between built-in appli-

ance and any cabinet above is 500mm.

560

490

555 mm

18 - 40mm

• To prevent leakage of liquid between the

edge of the hob and the worktop, place the

adhesive seal provided along the entire

outer edge of the hob before assembly.

Please refer to Assembly Instruction.

Please refer to the assembly instructions.

Electrical connection

• All electrical connections must be carried

out by an authorised installer.

• Follow the connection diagram (on the un-

der side of the product).

• This appliance has a Y-type connection and

requires a mains cable H05VV-F. Cable

needs mandatory sleeves. According to IEC

regulations use for one-phase connection:

mains cable 3 x 4 mm², for two-phase con-

nection: mains cable 4 x 2.5 mm². External

cable diameter: min 8 mm - max 12 mm.

Please respect specific national regulations

in the first priority.

• The connection terminals can be accessed

by removing the junction box cover.

• Check that the domestic power supply

characteristics (voltage, maximum power

and current) are compatible with those of

the appliance.

• Connect the appliance as shown in the dia-

gram (in compliance with reference stand-

ards in force nationally for mains voltage).

• Do not weld any of the cables!

Min. 500 mm