IKEA KULINARISK Installation Instructions Manual - Page 26

Browse online or download pdf Installation Instructions Manual for Ventilation Hood IKEA KULINARISK. IKEA KULINARISK 36 pages. Oven with steam feature
Also for IKEA KULINARISK: Instruction Manual (20 pages), User Manual (36 pages), User Manual (16 pages), User Manual (36 pages), User Manual (32 pages), Manual (36 pages), Instruction Manual (48 pages), Instructions Manual (36 pages), Manual (24 pages), Manual (20 pages), Manual (44 pages), User Manual (36 pages), Manual (40 pages), Manual (40 pages), User Manual (20 pages), Manual (37 pages), Manual (32 pages), Quick Start Manual (16 pages), Manual (20 pages), Manual (20 pages), Manual (36 pages), Manual (21 pages), Quick Start Manual (8 pages), Manual (40 pages), Manual (20 pages), Manual (32 pages), Manual (36 pages), Manual (17 pages)

IKEA KULINARISK Installation Instructions Manual
ENGLISH
3. Turn the lamp glass cover
counterclockwise to remove it.
4. Clean the glass cover.
5. Replace the oven light bulb with a 40
W, 220 - 240 V (50 Hz), 350 °C heat

Troubleshooting

Warning! Refer to Safety
chapters.
What to do if...
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
The display shows F111.
6. Install the glass cover.
Possible cause
The oven is deactivated.
The clock is not set.
The necessary settings are
not set.
The automatic switch-off is
activated.
The Child Lock is on.
The door is not closed cor-
rectly.
The fuse is blown.
The lamp is defective.
The plug of the core temper-
ature sensor is not correctly
installed into the socket.
resistant oven light bulb (connection
type: G9).
Activate the oven.
Set the clock.
Make sure that the settings
are correct.
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Fully close the door.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
Replace the lamp.
Put the plug of the core tem-
perature sensor as far as
possible into the socket.
26
Remedy