Ganz ZC-D7000 SERIES Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Security Camera Ganz ZC-D7000 SERIES. Ganz ZC-D7000 SERIES 8 pages.

Print Page
Ganz ZC-D7000 SERIES Instruction Manual
Setting the mode setting switch
Do not alter the position of the mode setting switch marked "FIX" from its factory default setting. If the set position is changed, the auto iris may
become inoperable.
Mode setting switch
Factory default switch settings
ON
Digital Day/Night model:
ZC-D7312NHA
OFF
1
ON
Mechanical Day/Night model:
ZC-DN7312NHA
OFF
AWB
2
White Balance (WB)
ATW
INT.
3
Synchronization (Sync)
L.L.
ON
4
Flickerless (FL)
OFF
ON
5
Backlight compensation (BLC)
OFF
H
6
Auto Gain Control (AGC)
L
7
FIX
DN1
8
Day/Night sensitivity switching
DN2
Setting the fl ickerless function to "ON" will give a darker picture than when set to "OFF" in low light conditions.
EG-6
Enables the automatic Day/Night switching. (Low light conditions: B/W, Normal light: color)
The digital processing provides high sensitivity pictures.
Color images only.
Enables the automatic Day/Night switching. (Low light conditions: B/W, Normal light: color)
The IR cut fi lter automatic switching provides high sensitivity pictures.
Color images only.
Locks the white balance setting.
Adjusts white balance according to the color temperature of light source.
Internal synchronization mode
Line lock mode (24V AC, 60Hz only)
Shutter speed to be fi xed at 1/100.
Normal position
Set to this position when a strong light is in the back ground.
Normal position
Adjusts brightness by a high sensitivity gain in low lighting conditions. The sensitivity is higher than
in the "L" setting.
Adjusts brightness by a standard gain in low lighting conditions.
Do not change the switch position from the factory setting.
Standard brightness setting to activate the automatic Day/Night switching.
Brightness setting to activate the automatic Day/Night switching in lower lighting condition than in
DN1.