Ganz zn-d9312nha Instruction Manual - Page 3
Browse online or download pdf Instruction Manual for Security Camera Ganz zn-d9312nha. Ganz zn-d9312nha 12 pages. Zn-d9000 series network mini dome cameras
Print Page
SAFETY PRECAUTIONS
The installation should be made by a qualifi ed service person and should
conform to all local codes.
This symbol indicates that there is a possibility of death or damage to
operator or others.
To prevent fi re or electric shock, do not expose this product to rain or
moisture.
This symbol indicates that there is a possibility of injury or damage to
equipment.
(1)
Use only 24 V AC power supply marked class 2 or +12 V DC regulated power
supply marked class 2.
(2)
To prevent fi re or electrical shock, UL listed class 2 wiring should be used for
the 12 V DC or 24 V AC input terminal.
(3)
Be sure to connect each lead to the appropriate terminal. Wrong connection
may cause malfunction and / or damage to the video camera.
(4)
Do not attempt to aim the camera at the sun or other extremely bright objects
that cause smear to appear irrespective of whether the camera is operating or
not. This can damage the CCD (Charge Coupled Device).
(5)
Do not place the camera in the following locations.
1
Locations subject to extremely high or low temperatures.
(Operating temperature range: -10°C to +50°C {14°F to 122°F})
(Storage temperature range: -20°C to +60°C {-4°F to 140°F})
2
Locations subject to high levels of humidity and dust.
(Operating humidity range: max 85% {No condensation})
(Storage humidity range: max 95% {No condensation})
3
Locations where there are large amounts of water vapor and steam.
(6)
Ensure the location selected is suffi ciently strong enough to support the weight
of the camera and is free from vibration.
(7)
When this camera is installed near equipment that emits a strong electromag-
netic fi eld, some irregularity such as noise on the monitor screen may happen.
(8) Be sure to use screws suitable for the type of material to which the camera is
being mounted.
(9) Do not allow the camera to be subjected to strong impacts or shocks. The
camera could be damaged by improper handling or storage.
(10) Never attempt to disassemble or modify the camera.
(11) If an abnormality should occur, immediately turn off the power and consult your
dealer.
(12) When inserting or extracting a microSD card, be sure to turn off the power for
safety's sake.
(13) When using the PoE power source, be sure to use a IEEE802.3af supported
hub or a power unit.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
WARNING-TO REDUCE A RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN MOISTURE.
EG-3