Avantco 178SSUC27FHC User Manual - Page 5
Browse online or download pdf User Manual for Refrigerator Avantco 178SSUC27FHC. Avantco 178SSUC27FHC 10 pages. Undercounter & worktop refrigerators & freezers
Also for Avantco 178SSUC27FHC: User Manual (10 pages)
Print Page
Installation
This unit is intended for use in a temperature-controlled environment less than 75 degrees
Fahrenheit and 60% relative humidity.
IMPORTANT –
Please Read Before Installation:
•
If the shelf has a raised lip, the lip needs to be installed facing up towards the rear of the cabinet to
promote proper air flow. Failure to install the shelves properly is considered user error and is not
covered by warranty.
•
If the unit has recently been transported on its side, please let the unit stand upright for a minimum of
24 hours before plugging it in.
•
Make sure that the unit has reached the desired temperature before loading the unit with products.
This unit is meant for keeping cold products cold, not chilling warm products.
•
Make sure that there is proper ventilation around the unit in the area where it will operate.
•
Make sure all accessories are installed (i.e., shelves, shelf clips, casters) before plugging the unit in.
•
Do not attempt to remove or repair any component of the unit. Consult an authorized service
technician for servicing/repair.
•
Do not sit inside the unit or hang on the doors.
•
Please read through the manual in its entirety.
•
This unit should be located away from doors, air ducts, and fans that could disrupt airflow and negatively
impact performance.
Cabinet Location Guidelines
•
Install the unit on strong and leveled surfaces.
- If the surface is uneven, the unit may be noisy.
- The unit may malfunction if the surface is uneven.
•
Install the unit in an indoor, well-ventilated area.
- For best performance, please maintain clearance of 4" on the back of the unit.
- Brackets should be attached on the back of the unit.
- Do not use outdoors. For indoor use only.
- Avoid direct sunlight.
•
Avoid installation in a high humidity and/or dusty area.
- Humidity above 60% can cause the unit to rust, collect condensation, and may decrease efficiency.
- Dust collected on the condenser coil will cause the unit to malfunction.
•
Select a location away from heat and moisture-generating equipment.
- Ambient temperatures above 75 degrees Fahrenheit may cause the compressor to malfunction.
- For optimal performance, this unit should not be used in environments with ambient temperatures
exceeding 75 degrees Fahrenheit.
- The unit should not be placed in areas with an ambient temperature over 90 degrees Fahrenheit.
- Equipment malfunctions due to ambient temperatures above 90 degrees could void the warranty.
- Do not install this unit inside a closet or alcove.
User Manual
Undercounter & Worktop Refrigerators & Freezers
www.AvantcoRefrigeration.com
5