HIKVISION TURBO HD U1T Series User Manual - Page 9
Browse online or download pdf User Manual for Security Camera HIKVISION TURBO HD U1T Series. HIKVISION TURBO HD U1T Series 15 pages. Bullet & turret camera
Also for HIKVISION TURBO HD U1T Series: User Manual (15 pages)
Print Page
8. Fit the bubble back to the camera.
9. Tighten the screws on the bubble of the dome camera
to finish the installation.
2.4 Wall Mounting of Type III Camera
Before you start:
You need to purchase a wall mount first.
Steps:
1. Drill 4 screw holes in the wall according to the holes of
the mount.
2. Attach the mount to the wall by aligning the 4 screw
holes of the mount with expansion screws on the wall.
3. Secure the mount with 4 hex nuts and washers.
4. Refer to step 3 of 2.3 Ceiling Mounting of Type III
Camera to remove dome camera's bubble.
5. Attach the back box of the dome camera to the wall
mount, and secure them with supplied screws.
Figure 2-14 Attach the Back Box to the Mount
6. Route the cables through the mount.
7.
steps 6 to 9 of the
Repeat
III Camera to complete the installation
Figure 2-11 Fit the Black Liner Back
Figure 2-12 Finish Installation
Figure 2-13 Install Wall Mount
Ceiling Mounting of Type
2.1
.