HIKVISION TurboHD DS-2CE16H0T-AIT3ZF User Manual - Page 8
Browse online or download pdf User Manual for Security Camera HIKVISION TurboHD DS-2CE16H0T-AIT3ZF. HIKVISION TurboHD DS-2CE16H0T-AIT3ZF 15 pages. Bullet and turret camera
Also for HIKVISION TurboHD DS-2CE16H0T-AIT3ZF: User Manual (16 pages)
Print Page
4. Fix the mounting base on the ceiling with supplied
screws.
Figure 2-9 Fix the Mounting Base on the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall, expansion bolts are required to fix
the camera. For wooden wall, self-tapping screws are
required.
5. Route the cables through the cable hole, or the side
opening.
6. Install the main body to the mounting base and
insert the clip plate.
Figure 2-10 Install the Turret Camera
7. Tighten the screws with the screw driver.
8. Connect the corresponding cables, such as power
cord, and video cable.
9. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Clip Plate
Figure 2-8 Remove the Clip Plate
Pan Position
[0° to 360°]
Rotation Position
[0° to 360°]
Figure 2-11 3-axis Adjustment
Tilt Position
[0° to 75°]