HIKVISION U7T Series User Manual - Page 6

Browse online or download pdf User Manual for Security Camera HIKVISION U7T Series. HIKVISION U7T Series 15 pages. Turbo hd bullet & turret camera

Print Page

For cement wall, expansion bolts are required to fix the



camera. For wooden wall, self-tapping screws are

required.

5. Connect the corresponding power cord, and video

cable.

6. Power on the camera to check whether the image on

the monitor is gotten from the optimum angle. If not,

adjust the surveillance angle.

P:360°

T:90°

1) Loosen the No.① adjusting screw to adjust the

pan position [0° to 360°]. Tighten the No.①

adjusting screw.

2) Loosen the No.② adjusting screw to adjust the

tilting position [0° to 90°]. Tighten the No.②

adjusting screw.

3) Loosen the No.③ adjusting screw to adjust the

rotation position [0° to 360°]. Tighten the No.③

adjusting screw.

2.1.2 Ceiling Mounting with

Before you start:

You need to purchase a junction box separately.



Both wall mounting and ceiling mounting are suitable



for the bullet camera. Ceiling mounting will be taken as

an example in this section. And you can take steps of

ceiling mounting as a reference for wall mounting.

Steps:

1. Paste the junction box's drill template on the ceiling.

2. Drill screw holes and the cable hole (optional) in the

ceiling according to the holes of the drill template.

Note:

Drill the cable hole, when adopting ceiling outlet to

route the cable.

3. Take apart the junction box, and align the screw holes

of the bullet camera with those on the junction box's

cover.

4. Fix the camera on the junction box's cover.

R:360°

Figure 2-3 3-axis Adjustment

Figure 2-4 Drill Template

Junction Box