Briteq BT-THEATRE 150EZ Mk2 Operation Manual - Page 5

Browse online or download pdf Operation Manual for Lighting Equipment Briteq BT-THEATRE 150EZ Mk2. Briteq BT-THEATRE 150EZ Mk2 17 pages.

Print Page

Briteq BT-THEATRE 150EZ Mk2 Operation Manual

ENGLISH

DESCRIPTION:

1. MAINS INPUT: equipped with original Neutrik PowerCON

PowerCon

extension cable here.

2. MAINS OUTPUT: used to daisy chain the power to several other projectors. Always pay attention to the

maximum load while adding projectors! Special Multi cables (PowerCON

available: see our website!)

3. MAINS FUSE: protects the unit in case of electrical problems, always use the prescribed fuse!

4. DMX IN/OUT: both 3pin and 5pin in/outputs are available to daisy chain the projector with other units that

will be controlled by a DMX-controller.

5. M-DMX INPUT: Please note that this USB-connector is NOT used for updates or to connect

the unit to a PC! Instead, this USB-connector makes it very easy to add wireless DMX to the

unit! Just add the (optional) WTR-DMX DONGLE from BRITEQ

DMX! Moreover, you will be able to connect other DMX-controlled equipment to the DMX-

output so you can share the wireless DMX function with all connected units! No extra settings

to be made in the setup menu, just follow the procedure in the user manual supplied with the

WTR-DMX DONGLE from BRITEQ

WWW.BRITEQ-LIGHTING.COM (order code: 4645)

6. DISPLAY: shows the various menus and the selected functions:

7. MENU-button: used to enter and exit the setup menu or to jump to a higher level in the setup menu.

8. ENTER-button: used to select a menu option or confirm a setting.

9. ▲-button: used to go to the previous menu option or to increase a parameter value.

10. ▼-button: used to go to the next menu option or to decrease a parameter value.

11. SAFETY EYE: used to attach a safety cable when the unit is rigged, see paragraph "overhead rigging".

12. DIMMER KNOB: (fine adjustment) press the knob to override the DMX-input and adjust the light output

manually. This feature can be used to install and align the projector on the stage without the need for a

DMX-controller. Press the knob again to return to DMX-control.

13. FOCUS KNOB: (coarse adjustment) press the knob to override the DMX-input

and adjust the beam angle manually. This feature can be used to install and

align the projector on the stage without the need for a DMX-controller. Press the

knob again to return to DMX-control.

Remark: Press the FOCUS KNOB during 5 seconds to activate a hidden menu

where you can reset and/or calibrate the Focus system. See chapter "OTHER

SETUP FUNCTIONS" for more information.

14. HANGING BRACKET: with a knob on both sides to fasten the unit in the desired

position. You can use the hole in the center of the bracket to fix a hook or truss

clamp.

NOTE: for easy and fast alignment of the projectors the standard hanging

bracket can be replaced by the optionally available pole yoke.

(BT-THEATRE YOKE ~ order code: 6021).

BRITEQ

. The separate WTR-DMX DONGLE is available from

3/13

BT-THEATRE 150EZ/250EZ Mk2

OPERATION MANUAL

. Connect the supplied mains cable or any

+ DMX XLR-cables are optionally

and you will get wireless