HIKVISION Ultra Series Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Security Camera HIKVISION Ultra Series. HIKVISION Ultra Series 2 pages. Face recognition terminal

Print Page

3.2 Device Wiring (With Secure Door Control Unit

Face Recogni on Terminal

Power Input

Sensor Input

Secure Door

Control Unit

485+

Yellow

485-

Blue

Wiring Terminal

RS-485

Exit Bu on

GND

Black

Lock Output

The secure door control unit should connect to an external power supply separately. The suggested external

power supply is 12 V, 0.5 A.

Add Face Picture

1. Use ﬁnger to hold the screen surface for 3 s and slide to right/le

and enter the ac va on password to enter the Home page.

2. Enter the User Management page, tap + to enter the Add User

page.

3. Set the user parameters according to actual needs.

Only the device with the ﬁngerprint module support the

ﬁngerprint related func ons.

4. Tap Face and add the face informa on according to the

instruc ons.

You can view the captured picture on the screen, Make sure the face

picture is in good quality and size.

For details about the ps and posi ons when collec ng or

comparing the face picture, see the contents on the right.

5. If the picture is in good condi on, tap the

Or tap the

to take another face picture.

6. Tap the save icon to save the se ngs.

Go back to the ini al page to start authen ca on.

For other authen ca on methods, see the device user manual.

User other authen ca on methods if the device is aﬀected by the

light or other items.

1:N Matching: The device will compare the captured face picture

with the ones in the database.

1:1 Matching: The device will compare the captured face picture with

the user linked face picture.

Biometric recogni on products are not completely applicable to

an -spooﬁng environments. If you require a higher security

level, use mul ple authen ca on modes.

Secure Door Control Unit

+12 V

Red

+12 V

GND

Black

Door Contact

SENSOR

Green/Brown

Black

GND

Exit Bu on

BUTTON

Green/Black

GND

Black

White/Purple

(NC)

Electric

White/Black

COM

Dropbolt

White/Red

Power

Electric

Strike

(NO)

Tips When Collec ng/Comparing Face Picture

Expression

Keep your expression naturally when collec ng or comparing

face pictures, just like the expression in the picture on the right.

Do not wear hat, sunglasses, or other accessories that can aﬀect

the facial recogni on func on.

Do not make your hair cover your eyes, ears, etc. and heavy

makeup is not allowed.

Posture

In order to get a good quality and accurate face picture, posi on your face looking at

the camera when collec ng or comparing face picture.

Correct

Tilt

Side

Size

Make sure your face is in the middle of the collec ng window.

Correct

Too Close

4 Quick Operation

Power on and wire the network cable a er installa on. You should

ac vate the device before the ﬁrst login.

If the device is not ac vated yet, it will enter the Ac vate Device

page a er powering on.

Step:

1. Create a password and conﬁrm the password.

2. Tap Ac vate to ac vate the device.

For other ac va on methods, see the device user manual.

admin or minda are not supported for the ac va on password.

Set Applica on Mode

A er ac va on, you should select an applica on mode.

Steps:

If you install the device indoors near the window or

the face recogni on func on is note working well,

select Others.

Set Language

Select a language from the drop-down list.

Posi ons When Collec ng/Comparing Face Picture

Recommended Height:

1.43 m to 1.90 m

1.4 m

Raise

Bow

0.5 m

Too Close

Too Far

1.4 m

0.5 m

FCC Informa on

Please take a en on that changes or modiﬁca on not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a

STRONG PASSWORD RECOMMENDED-

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

We highly recommend you create a strong password of your

provide reasonable protec on against harmful interference in a residen al installa on. This

own choosing(using a minimum of 8 characters, including

equipment generates, uses and can radiate radio frequency energy and, if not installed and

upper case le ers, lower case le ers, numbers, and special

used in accordance with the instruc ons, may cause harmful interference to radio

communica ons. However, there is no guarantee that interference will not occur in a

characters) in order to increase the security of your product.

par cular installa on. If this equipment does cause harmful interference to radio or

And we recommend you reset your password regularly,

television recep on, which can be determined by turning the equipment oﬀ and on, the user

especially in the high security system, rese ng the password

is encouraged to try to correct the interference by one or more of the following measures:

monthly or weekly can be er protect your product.

—Reorient or relocate the receiving antenna.

—Increase the separa on between the equipment and receiver.

—Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver

is connected.

—Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance 20cm between

the radiator and your body.

FCC Condi ons

Set Administrator

This device complies with part 15 of the FCC Rules. Opera on is subject to the following two

condi ons:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired opera on.

1. Enter the administrator's name and tap Next.

2. Select a creden al to add. You can select face, ﬁngerprint,

or card.

3. Tap OK.

Too High

Too Low

1.4 m

0.5 m

Too Far

1.4 m

1.2 m

Regulatory Information

This product and - if applicable - the supplied accessories too are marked

with "CE" and comply therefore with the applicable harmonized European

standards listed under the RE Direc ve 2014/53/EU, the EMC Direc ve

2014/30/EU, the RoHS Direc ve 2011/65/EU.

2006/66/EC (ba ery direc ve): This product contains a ba ery that cannot

be disposed of as unsorted municipal waste in the European Union. See

the product documenta on for speciﬁc ba ery informa on. The ba ery is

marked with this symbol, which may include le ering to indicate cadmium

(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the ba ery to

your supplier or to a designated collec on point. For more informa on see:

www.recyclethis.info

2012/19/EU (WEEE direc ve): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For

proper recycling, return this product to your local supplier upon the

purchase of equivalent new equipment, or dispose of it at designated

collec on points. For more informa on see: www.recyclethis.info

Warning

In the use of the product, you must be in strict compliance with the electrical safety

regula ons

of the na on and region.

CAUTION: To reduce the risk of ﬁre, replace only with the same type and ra ng of fuse.

CAUTION: This equipment is for use only with Hikvision's bracket. Use with other (carts,

stands, or carriers) may result in instability causing injury.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Please use the power adapter, which is provided by normal company. The power

consump on cannot be less than the required value.

Do not connect several devices to one power adapter as adapter overload may cause over-

heat or ﬁre hazard.

Please make sure that the power has been disconnected before you wire, install or

dismantle the device.

When the product is installed on wall or ceiling, the device shall be ﬁrmly ﬁxed.

If smoke, odors or noise rise from the device, turn oﬀ the power at once and unplug the

power cable, and then please contact the service center.

If the product does not work properly, please contact your dealer or the nearest service

center. Never a empt to disassemble the device yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or maintenance.)

Cau on

+ iden ﬁes the posi ve terminal(s) of equipment which is used with, or generates

direct current. + iden ﬁes the nega ve terminal(s) of equipment which is used with,

or generates direct current.

No naked ﬂame sources, such as lighted candles, should be placed on the equipment.

The USB port of the equipment is used for connec ng to a USB ﬂash drive only.

The serial port of the equipment is used for debugging only.

Burned ﬁngers when handling

the ﬁngerprint sensor metal

. Wait one-half hour a er

switching oﬀ before handling the parts.

Install the equipment according to the instruc ons in this manual.

To prevent injury, this equipment must be securely a ached to the ﬂoor/wall in

accordance with the installa on instruc ons.

Do not drop the device or subject it to physical shock, and do not expose it to high

electromagne sm radia on. Avoid the equipment installa on on vibra ons surface or

places subject to shock (ignorance can cause equipment damage).

Do not place the device in extremely hot (refer to the speciﬁca on of the device for

the detailed opera ng temperature), cold, dusty or damp loca ons, and do not expose

it to high electromagne c radia on.

The device cover for indoor use shall be kept from rain and moisture.

Exposing the equipment to direct sun light, low ven la on or heat source such as

heater or radiator is forbidden (ignorance can cause ﬁre danger).

Do not aim the device at the sun or extra bright places. A blooming or smear may

occur otherwise (which is not a malfunc on however), and aﬀec ng the endurance of

sensor at the same me.

Please use the provided glove when open up the device cover, avoid direct contact

with the device cover, because the acidic sweat of the ﬁngers may erode the surface

coa ng of the device cover.

Please use a so and dry cloth when clean inside and outside surfaces of the device

cover, do not use alkaline detergents.

Please keep all wrappers a er unpack them for future use. In case of any failure

occurred, you need to return the device to the factory with the original wrapper.

Transporta on without the original wrapper may result in damage on the device and

lead to addi onal costs.

Improper use or replacement of the ba ery may result in hazard of explosion. Replace

with the

same or equivalent type only. Dispose of used ba eries according to the instruc ons

provided by the ba ery manufacturer.

Biometric recogni on products are not completely applicable to an -spooﬁng

environments. If you require a higher security level, use mul ple authen ca on

modes.

Please make sure that the biometric recogni on accuracy will be aﬀected by the

collected pictures' quality and the light in the environment, which cannot be

completely correct.