IKEA tradfri Manual - Page 4

Browse online or download pdf Manual for Home Lighting IKEA tradfri. IKEA tradfri 20 pages. Motion sensor
Also for IKEA tradfri: User Manual (36 pages), Assembly Instructions Manual (36 pages), Assembly Instructions Manual (24 pages), Manual (12 pages), Manual (28 pages), Manual (20 pages), Manual (16 pages), Quick Manual (36 pages), Manual (16 pages), Manual (32 pages), Manual (12 pages), Manual (8 pages), Manual (24 pages), Manual (24 pages), Manual (32 pages), Manual (24 pages), Manual (32 pages), Manual (32 pages), Manual (24 pages), Manual (12 pages), Manual (24 pages), Manual (24 pages), Manual (24 pages), Manual (29 pages), Manual (12 pages), Quick Start Manual (12 pages), Manual (40 pages), Quick Start Manual (24 pages), Quick Start Manual (16 pages), Manual (16 pages), Manual (24 pages), Manual (32 pages), Quick Start Manual (2 pages), Manual (40 pages), Quick Start Manual (16 pages), Manual (36 pages), Manual (28 pages), Quick Start Manual (2 pages), Manual (32 pages), Manual (32 pages), Manual (24 pages), Instructions Manual (8 pages), Manual (24 pages), Quick Start Manual (4 pages), Manual (8 pages), Manual (20 pages), Manual (12 pages), Manual (8 pages), Manual (32 pages), Quick Start Manual (4 pages), Manual (48 pages)

Print Page
IKEA tradfri Manual
ENGLISH
FUNCTIONS MOTION SENSOR
1
Adjust the time setting. The
lights will turn off either 1, 5 or 10
5
minutes after the last motion is
10
detected.
Day/Night setting. During the
daytime the lights will always turn
on when triggered by motion.
At night the lights will only turn
on when it is dark and they are
triggered by motion.
Button for pairing. Add IKEA Smart
lighting products to your system.
Follow the instructions below:
ADDING DEVICES TO
YOUR MOTION SENSOR
Your kits come already paired, so you will
not need to pair them yourself.
Before you can use your motion sensor
it must be paired to the light source you
want to steer. If you want to add more
light sources, just repeat the steps below
for each individual light source.
1 Make sure that your light source is
installed and the power is turned on.
2 Hold the motion sensor close to the
light source you want to add (no more
than 5 cm away).
3 Press and hold the pairing button
at least 10 seconds. A red LED light will
shine steadily on the front side of the
motion sensor.
4 Your light source will flash one time to
indicate that it has successfully paired.
Up to 10 light sources can be paired with 1
motion sensor.
Make sure to pair them one at a time. If
the light sources are close to each other,
disconnect those that have already been
paired from the main power switch.
REMOVING DEVICES FROM
YOUR MOTION SENSOR
1 Make sure the device you want to
4
for