IKEA tradfri Manual - Page 4

Browse online or download pdf Manual for Home Lighting IKEA tradfri. IKEA tradfri 24 pages. Motion sensor
Also for IKEA tradfri: User Manual (36 pages), Assembly Instructions Manual (36 pages), Assembly Instructions Manual (24 pages), Manual (12 pages), Manual (28 pages), Manual (20 pages), Manual (16 pages), Manual (20 pages), Quick Manual (36 pages), Manual (16 pages), Manual (32 pages), Manual (12 pages), Manual (8 pages), Manual (24 pages), Manual (32 pages), Manual (24 pages), Manual (32 pages), Manual (32 pages), Manual (24 pages), Manual (12 pages), Manual (24 pages), Manual (24 pages), Manual (24 pages), Manual (29 pages), Manual (12 pages), Quick Start Manual (12 pages), Manual (40 pages), Quick Start Manual (24 pages), Quick Start Manual (16 pages), Manual (16 pages), Manual (24 pages), Manual (32 pages), Quick Start Manual (2 pages), Manual (40 pages), Quick Start Manual (16 pages), Manual (36 pages), Manual (28 pages), Quick Start Manual (2 pages), Manual (32 pages), Manual (32 pages), Manual (24 pages), Instructions Manual (8 pages), Manual (24 pages), Quick Start Manual (4 pages), Manual (8 pages), Manual (20 pages), Manual (12 pages), Manual (8 pages), Manual (32 pages), Quick Start Manual (4 pages), Manual (48 pages)

Print Page

ENGLISH

REMOTE CONTROL FUNCTIONS

ON/OFF: Press to turn your light source on and

off.

Press and hold for at least 3 seconds to

synchronize your lights.

Dim up/down: Short presses will dim up/down

in steps. To dim up/down seamlessly, press and

hold the button.

Change white spectrum, colours or scenes.

Pairing: Add IKEA Smart Lighting products to

your system. See instructions below.

ADDING DEVICES TO YOUR REMOTE CONTROL

When the remote control is sold together with

a light source (in the same package), they are

already paired. If the remote control is purchased

separately, you must manually pair it to your light

source.

To add light sources, just repeat the steps below.

1. Make sure that your light source is installed and

the main power switch is turned on.

2. Hold the remote control close to the light source

you want to add (no more than 5 cm away).

3. Press and hold the pairing button

10 seconds. A red light will shine steadily on

the remote control. Your light source will begin

to dim and flash one time to indicate that it has

been successfully paired.

Up to 10 light sources can be paired with 1 remote

control.

Make sure to pair them one at a time. If the light

sources are close to each other, disconnect those

that have already been paired from the main power

switch.

REMOVING DEVICES FROM YOUR

REMOTE CONTROL

1. Make sure the main power switch is turned on for

the light source you want to un-pair from your

TRÅDFRI remote control.

2. Hold the remote control close to the light source

you want to remove (no more than 5 cm away).

3. Press and hold the pairing button

10 seconds. A red light will shine steadily on the

steering device. Your light source will begin to

dim and flash twice to indicate that it has been

successfully un-paired.

FACTORY RESET YOUR DEVICES

For light sources:

Toggle the main switch 6 times.

For remote control:

Press the pairing button

seconds.

for at least

SYNCHRONIZING

If your light source becomes unsynchronized, press

and hold the ON/OFF button

to return the light source to its default setting

(100% brightness, 2700K).

for at least

4 times within 5

for at least 3 seconds