IKEA tradfri Manual - Page 4

Browse online or download pdf Manual for Home Lighting IKEA tradfri. IKEA tradfri 24 pages. Motion sensor
Also for IKEA tradfri: User Manual (36 pages), Assembly Instructions Manual (36 pages), Assembly Instructions Manual (24 pages), Manual (12 pages), Manual (28 pages), Manual (20 pages), Manual (16 pages), Manual (20 pages), Quick Manual (36 pages), Manual (16 pages), Manual (32 pages), Manual (12 pages), Manual (8 pages), Manual (24 pages), Manual (24 pages), Manual (32 pages), Manual (24 pages), Manual (32 pages), Manual (32 pages), Manual (24 pages), Manual (12 pages), Manual (24 pages), Manual (24 pages), Manual (24 pages), Manual (29 pages), Manual (12 pages), Quick Start Manual (12 pages), Manual (40 pages), Quick Start Manual (24 pages), Quick Start Manual (16 pages), Manual (16 pages), Manual (24 pages), Manual (32 pages), Quick Start Manual (2 pages), Manual (40 pages), Quick Start Manual (16 pages), Manual (36 pages), Manual (28 pages), Quick Start Manual (2 pages), Manual (32 pages), Manual (32 pages), Instructions Manual (8 pages), Manual (24 pages), Quick Start Manual (4 pages), Manual (8 pages), Manual (20 pages), Manual (12 pages), Manual (8 pages), Manual (32 pages), Quick Start Manual (4 pages), Manual (48 pages)

Print Page

ENGLISH

WIRELESS DIMMER FUNCTIONS

ON/OFF: Rotate fast for 100% Brightness and OFF.

Dim up/down: Rotate slowly for dimming up/down.

Pairing: Add IKEA Smart Lighting products to

your system. See instructions below.

ADDING DEVICES TO YOUR WIRELESS DIMMER

When the wireless dimmer is sold together with a

light source (in the same package), they are already

paired.

To add light sources, just repeat the steps below.

1 Make sure that your light source is installed and

the main power switch is turned on.

2 Hold the wireless dimmer close to the light source

you want to add (no more than 5 cm away).

3 Press and hold the pairing button

10 seconds, you can find the pairing button under

the top cover. A red light will shine steadily on the

wireless dimmer. Your light source will begin to

dim and flash one time to indicate that it has been

successfully paired.

Up to 10 light sources can be paired with 1 wireless

dimmer. Make sure to pair them one at a time. If

the light sources are close to each other, disconnect

those that have already been paired from the main

power switch.

REMOVING DEVICES FROM

YOUR WIRELESS DIMMER

1 Make sure the main power switch is turned on for

the light source you want to un-pair from your

TRÅDFRI wireless dimmer.

2 Hold the wireless dimmer close to the light source

you want to remove (no more than 5 cm away).

3 Press and hold the pairing button

10 seconds, you can find the pairing button under

the top cover. A red light will shine steadily on

the wireless dimmer. Your light source will begin

to dim and flash twice to indicate that it has been

successfully un-paired.

FACTORY RESET YOUR DEVICES

For light sources:

Toggle the main switch 6 times.

For wireless dimmer:

for at least

Press the pairing button

seconds.

SYNCHRONIZING

If your light source becomes unsynchronized in

brightness, dim up until they all have reached 100%

brightness.

If lights sources are unresponsive, press the pairing

button

CHANGING THE BATTERY

When the wireless dimmer is used regularly and as

4 times within 5

one time.

for at least