Avantco 177SW72INCP User Manual - Page 5
Browse online or download pdf User Manual for Commercial Food Equipment Avantco 177SW72INCP. Avantco 177SW72INCP 9 pages. High wattage calrod food warmer/strip heater
Print Page
Operation
1. Plug cord into grounded electrical outlet of the correct voltage. Electrical shock can occur if
appliance is not grounded.
2. Flip the switch to the 'On' position.
3. Place food products directly under the elements for best results.
4. Turn unit off when not in use.
5. To disconnect appliance, turn switches off and remove plug from power source.
Installation
1. For strip warmers of high wattage (18-25 watts per
inch). 10-16" is the recommended mounting height.
2. Do not install food warmers above or around
combustible surfaces.
3. Food warmers can be mounted to the underside
of a shelf with a minimum gap of 1" to protect
electrical system.
4. Remove the two center screws from end plates.
Align the holes on the bracket with the mounting
holes on the end plate. Use the screw to secure the
bracket.
5. Drill 4 holes on the underside of a shelf, use
fasteners to install the brackets to the underside of
the shelf.
6. A qualified electrician must install hardwired models
or warranty will be void.
Cleaning
1. Unplug the cord and let warmer cool before cleaning or moving.
2. This unit can be cleaned with a damp sponge and mild soap. Rinse with clean water and wipe dry.
3. Do not immerse in water or other liquid.
www.AvantcoEquipment.com
User Manual
4-6"
High
Wattage
10-16"
12"
5