Avantco 178CBE84HC User Manual - Page 4
Browse online or download pdf User Manual for Commercial Food Equipment Avantco 178CBE84HC. Avantco 178CBE84HC 12 pages. Refrigerated chef bases
Also for Avantco 178CBE84HC: User Manual (13 pages)
Print Page
Installation
This unit is intended for use in a temperature-controlled environment of less than 75
degrees Fahrenheit and 60% relative humidity. Malfunction due to improper conditions is
not covered under warranty.
IMPORTANT! Please Read Before Installation:
•
If the unit has recently been transported on its side, please let unit stand still for a minimum of
24 hours before plugging it in.
•
Make sure that the unit has reached the desired temperature before loading the unit with prod-
ucts. This unit is meant for keeping cold products cold, not chilling warm products.
•
Make sure that there is proper ventilation around the unit in the area where it will operate.
•
Make sure all accessories are installed (i.e., shelves, shelf clips, casters) before plugging the
unit in.
•
Do not attempt to remove or repair any component of the unit. Consult an authorized service
technician for servicing/repair.
•
Please read through the manual in its entirety.
•
This unit is designed to perform in a temperature-controlled environment at 60% relative humid-
ity. The unit should be located away from doors, air ducts, and fans that could disrupt airflow and
negatively impact performance.
Cabinet Location Guidelines
•
Install the unit on strong and leveled surfaces.
- If the surface is uneven, the unit may be noisy.
- The unit may malfunction if the surface is uneven.
•
Install the unit in an indoor, well-ventilated area.
- For best performance, please maintain clearance of 6" on the back of the unit.
- Do not use outdoors. For indoor use only.
- Avoid direct sunlight.
•
Avoid installation in a high humidity and/or dusty area.
- Humidity above 60% can cause the unit to rust, collect condensation, and may
decrease efficiency.
www.AvantcoRefrigeration.com
4
User Manual
Refrigerated Chef Bases