IKEA VAPPEBY Manual - Page 20

Browse online or download pdf Manual for Home Lighting IKEA VAPPEBY. IKEA VAPPEBY 28 pages.
Also for IKEA VAPPEBY: Manual (32 pages), Manual (36 pages), Manual (36 pages)

Print Page

Other settings:

Unpair Bluetooth devices

Set up a stereo pair

Enable/Disable the auto-off

function

Factory reset

Press and hold the Bluetooth pairing button (4) for ≥1.5 s.

The speaker will release the BT connection to the phone

and start searching for another device to pair with. LED will

change from steady light to flashing.

You can pair two identical VAPPEBY 20 gen3 speakers to

create a wider stereo experience. In this configuration, one

speaker serves as the left channel and the other serves as

the right channel.

1. Turn on both speakers.

2. Press and hold the BT pair button (4) for 1,5 sec on each

speaker to release any existing BT connections. LED

indicator should be flashing on both speakers

3. Press and hold the BT pair button (4) on both speakers at

the same time for 4 seconds until a confirmation sound

is played. Wait for the speakers to connect to each other

4. The LED on one of the speakers will be flashing. Open

the Bluetooth setting on your mobile device and connect

to this speaker. This speaker will becoe the left channel

in the stereo pair

To disable the stereo pair, follow instructions "Unpair

Bluetooth devices" on both speakers.

Move the switch (2) to position "20" to enable auto off.

The speaker will turn off automatically after 20 minutes if

no music is played. Move the switch (2) to position "∞" to

disable the auto off function

Press and hold the volume knob (5) for 5 seconds. A

confirmation sound will be played