Briteq BT-H2FOG II Operation Manual - Page 7

Browse online or download pdf Operation Manual for Fog Machine Briteq BT-H2FOG II. Briteq BT-H2FOG II 8 pages. Water-based low-fog machine

Print Page

ENGLISH

TRANSPORT INSTRUCTIONS

• Always empty the big water tank before transport: open the water evacuation tap (3) on the bottom of the

fogger.

• When the water tanks is empty: put the extendable PVC-hose in the big water tank.

• To avoid spilling fog fluid: make sure that the fog liquid canister is not more than half full during transport.

• Close the top lid of the flight case and unlock the wheel brakes.

• Put the flight case in the truck but DO NOT TIP THE FLIGHT CASE !!!

• Always lock the brakes during transport!!!

MAINTENANCE

• IMPORTANT: Always set the output to Zero and wait for minimum 30 seconds before to switch off the unit.

This allows the unit to execute its cleaning process so all the remaining fluid is removed from the internal

circuits..

• Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.

During inspection the following points should be checked:

• All screws used for installing the device and any of its parts should be tightly fastened and may not be

corroded.

• Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any

deformation.

• The mains cables must be in impeccable condition and should be replaced immediately when even a small

problem is detected.

Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!

SPECIFICATIONS

This unit is radio-interference suppressed. This product meets the requirements of the current European and

national guidelines. Conformity has been established and the relevant statements and documents have been

deposited by the manufacturer.

Mains Input:

Power consumption:

DMX Channels:

Fuse:

Warm up time:

Fog liquid tank:

Recommended fog liquid:

Optimally usable floor area:

Water tank:

Fog liquid consumption:

Water consumption:

Dimensions (L x W x H):

Weight:

You can download the latest version of this user manual on our website:

BRITEQ

All the information is subject to change without prior notice

AC 220-240V, 50/60Hz

1750 Watt

10A

3.5 min

2.5L

BT-LOWFOG LIQUID 5L

+/-120m²

+/- 10 liters

1-36 ml/min

115 ml/min

760 x 440 x 600 mm (including wheels – see drawing)

39 kg

5/5

OPERATION MANUAL

www.briteq-lighting.com

BT-H2FOG II