KitchenAid KUDC10FXSS5 User Instructions - Page 11
Browse online or download pdf User Instructions for Dishwasher KitchenAid KUDC10FXSS5. KitchenAid KUDC10FXSS5 18 pages.
Print Page
Your KitchenAid dishwasher may have some or all of these features.
ProScrub ®Option
Wash Area
The ProScrub ®option wash area is located at the back of the lower
level rack.
NOTE: You must select the ProScrub ®wash option to use this
feature. Make sure items do not interfere with the water feed tube,
spray arms, or ProScrub ®spray jets.
•
Keep the last tine row in the back of the lower rack in the 60 °
angled position when using the ProScrub ®option.
•
Load pans, casserole dishes, etc., in the back of the lower dish
rack with the soiled surfaces facing the ProScrub ®spray jets,
and resting on the last row of tines in the angled position.
•
Only one row of items may face the ProScrub ®spray jets.
Stacking, overlapping or nesting items will keep the ProScrub ®
spray jets from contacting all of the surfaces.
Silverware Basket
Use the slots in the covers to keep
your silverware separated for
optimum wash. There are specially
designed slots (small round holes) for
chopsticks.
Mix silverware types to
keep them separated. Load knives
down, forks up, and alternate
spoons, for best cleaning results.
NOTE: If your silverware
". "_ _",
does not fit into the
;.-\
2/j_,
_
designated slots, flip the
...... F/;_J _'_"'
covers up and push them
..... ; ._r_t
_'
down into the basket.
,';,3_
Y];_
,
c
;:l ...............
£
/
CULINARY CADDY ®Utensil Basket
Use the utensil basket to hold specialty
cooking utensils (serving spoons,
spatulas, and similar items), or overflow
silverware items.
The basket hangs on the bottom rack in
the right-hand corner. Load the basket
while it is on the bottom rack or remove
the basket for loading on a counter or
table.
NOTE: Spin the spray arms while the
bottom rack is inside the dishwasher to
be sure items in the basket do not stop the rotation of the arms.
Manual
Adjustable
2-Position
Top Rack
You can raise or lower the top rack to fit tall items in either the top
or bottom rack. Adjusters are located on each side of the top rack.
Raise the top rack to accommodate
items up to 9" (22 cm) in the
top rack and 13" (33 cm) in the bottom rack, or lower the top rack
to accommodate
items up to 11" (28 cm) in both the top and
bottom racks.
IMPORTANT: Remove dishes prior to removing the top rack from
the dishwasher.
1. To raise, remove rack and slide lower wheels into the rails as
directed in "Removable Top Rack" section.
2. To lower, remove rack and slide upper wheels into the rails as
directed in "Removable Top Rack" section.
Premium
Adjustable
2-Position
Top Rack
You can raise or lower the top rack to fit tall items in either the top
or bottom rack. Adjusters are located on each side of the top rack.
Each adjuster has 2 preset positions.
To raise the rack, press both rack adjusters and lift the rack until it
is in the Up position and level.
To lower the rack,
press both rack
adjusters and slide the
rack to its Down
position and level.
FLEXI-FOLD
DOWN
TM
Flexible
Tines
The row of tines on the left-hand and
right-hand sides of the top rack can
be adjusted to make room for a
variety of dishes.
To adjust the fold-down
tines:
1. Grasp the tip of the tine that is in
the tine holder.
2. Gently push the tine out of the
holder.
3. Lay the tines down, toward the
center of the rack.
NOTE: The bottom rack may also have 1 or 2 rows of flexible tines
located in the back of the rack. Follow the same instructions to
adjust.
11