IKEA RENLIG User Instructions - Page 9

Browse online or download pdf User Instructions for Dishwasher IKEA RENLIG. IKEA RENLIG 42 pages. Integrated dishwasher
Also for IKEA RENLIG: Owner's Manual (28 pages), User Manual (18 pages), Manual (32 pages), Instruction Manual (32 pages), Manual (20 pages)

Print Page

The most advanced and versatile cycle. This cycle senses load size, soil amount, and toughness of soil, to

adjust the cycle for optimal cleaning using only the amount of water and energy needed.

Use for hard-to-clean, heavily soiled pots, pans, casseroles, and tableware.

This cycle with only the Heat Dry option selected is recommended to completely wash and dry a full load of

normally soiled dishes. The energy label is based on this cycle.

Our most efficient dishwasher cycle helps minimize energy and water usage while cleaning dishes.

For fast results, 1 Hour Wash will clean dishes using slightly more water and energy. Select the Heat Dry

option to provide best drying performance.

OPTION SELECTIONS

OPTIONS

Select this option to raise the water temperature in the final rinse to

approximately 156°F (69°C). The Sani Rinse option adds heat and time to the

cycle. This high temperature rinse sanitizes your dishes and glassware in

accordance with NSF International NSF/ANSI Standard 184 for Residential

Dishwashers.

Certified residential dishwashers are not intended for licensed food

establishments.

Raises the main wash temperature to improve cleaning for loads containing

tough, baked-on food.

Can be selected with any wash cycles for shorter heated dry times and to use

less energy.

Can be selected with any wash cycles. When selected with the 1 Hour Wash

cycle, the time is increased by approximately 30 minutes.

Operates dishwasher up to 24 hours later. Select a cycle and wash options.

Press DELAY. Each time you press Delay, the display will show the next

available hour up to 24 hours. It will show 1 more hour up to 8 (1,2,3...) and

then, after 8 hours it will increase by 4 hours each time you press Delay. It will

show 12,16, 20 and 24. Press START/RESUME. Close the door firmly.

NOTE: The dishwasher remembers the last selected delay. To reset the delay

time to one other than the one displayed, keep pressing the Delay button until

you reach the desired time delay.

NOTE: Any time the door is opened (such as adding a dish), START/RESUME

must be pressed again to resume the countdown of the delay.

Cycle and Option Descriptions

CYCLE SELECTIONS

CYCLES

SOIL LEVEL

All soil levels

Light soil

Light to medium

CAN BE

SELECTED

WITH

WHAT IT DOES

Sensor

Raises the main wash

Heavy

temperature to 135°F

Normal

(57°C) and the final

rinse temperature to

156°F (69°C)

Sensor

Raises the main wash

Heavy

temperature to 135°F

Normal

(57°C)

Available with

Uses a heating

any cycle

element to speed

drying times.

Available with

Uses a heating

any cycle

element to speed

drying times.

Available with

Delays the start of a

any cycle

cycle for a maximum of

24 hours.

soil