IKEA SKINANDE Manual - Page 22

Browse online or download pdf Manual for Dishwasher IKEA SKINANDE. IKEA SKINANDE 32 pages. Dishwasher
Also for IKEA SKINANDE: User Manual (24 pages), User Manual (48 pages), Manual (24 pages), User Manual (4 pages), Manual (48 pages), Manual (16 pages), Installation Instructions Manual (16 pages), Manual (28 pages), Manual (28 pages), Manual (48 pages)

Print Page

ENGLISH

Problem and alarm code

The salt indicator continues

to stay on after the replen-

ishment of the salt container

Refer to "Before first use",

"Daily use", or "Hints and tips"

for other possible causes.

Once you have checked the appliance,

deactivate and activate the appliance. If

The washing and drying results are not satisfactory

Problem

Poor washing results.

Poor drying results.

There are whitish streaks or

bluish layers on glasses and

dishes.

There are stains and dry wa-

ter drops on glasses and

dishes.

Possible cause and solution

• If after 3 or 4 programmes, the salt indicator continues to

stay on, contact an Authorised Service Centre.

This can occur when you are using salt that needs more

time to dissolve.

There is no unwanted effect on the performance of the

appliance.

the problem occurs again, contact an

Authorised Service Centre.

For alarm codes not described in the table,

contact an Authorised Service Centre.

Possible cause and solution

• Refer to "Daily use", "Hints and tips" and basket

loading leaflet.

• Use more intensive washing programmes.

• Clean spray arm jets and filter. Refer to "Care and

Cleaning".

• Tableware has been left for too long inside a closed

appliance.

• There is no rinse aid or the dosage of rinse aid is not

enough. Set the rinse aid dispenser to a higher level.

• Plastic items may need to be towel dried.

• For the best drying performance activate the option

DryPlus and set AutoOpen.

• We recommend to always use rinse aid, even in com-

bination with multi-tablets.

• The release quantity of rinse aid is too much. Adjust

the rinse aid level to a lower level.

• The quantity of detergent is too much.

• The released quantity of rinse aid is not sufficient. Ad-

just the rinse aid level to a higher level.

• The quality of the rinse aid can be the cause.