ENGLISH
Multi-tabs containing salt are not
effective enough to soften hard
water.
How to set the water softener level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
off.
• The indicator
• The display shows the current setting:
e.g.
3. Press
setting. Each time you press
number increases. After level 10 you will
start again from level by 1
4. Press the on/off button to confirm the
setting.
Use of rinse aid and multi-tablets
When you activate the option Multitab, the
rinse aid dispenser continues to release
rinse aid. However you can deactivate the
rinse aid dispenser. In this case the drying
results may not be satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
How to deactivate the rinse aid dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
start to flash and the display is blank.
Heruntergeladen von
manualslib.de
and
,
and
and
continues to flash
= level 5.
repeatedly to change the
and
,
and
Handbücher-Suchmachiene
2. Press
• The indicators
• The indicator
flash.
• The display shows the current setting.
–
–
until
3. Press
4. Press the on/off button to confirm the
setting.
Acoustic signals
go
The acoustic signals operate when the
appliance has a malfunction and it is not
possible to deactivate them.
There is also an acoustic signal that
operates when the programme is
the level
completed. By default, this acoustic signal is
on, but it is possible to deactivate it.
How to deactivate the acoustic signal for
the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
flash and the display is blank.
2. Press
• The indicators
off.
• The indicator
• The display shows the current setting:
–
–
until
3. Press
4. Press the on/off button to confirm the
setting.
.
and
= rinse aid dispenser
activated.
= rinse aid dispenser
deactivated.
to change the setting.
and
,
and
continues to flash.
= Acoustic signal on.
= Acoustic signal off.
to change the setting.
11
go off.
continues to
until
,
start to
go
Print Page