Bernhard RF1000 User Manual/Instruction Manual - Page 6
Browse online or download pdf User Manual/Instruction Manual for Service Equipment Bernhard RF1000. Bernhard RF1000 15 pages. Bedknife front facing device
Print Page
4. Setting Up
4.1
NOTE: The Rapid Facer RF1000 as shipped will need some minimal assembly before use.
Coloured
dots
Mount Plate / Magnet assemblies
to rail, coloured dot facing coloured
dot as shown above.
Socket cap screws may be
tightened using the 3mm allen key
provided.
To complete the assembly fit the
grinding head on to the slide unit.
4.2
PRELIMINARY CHECKS
4.2.1
Ensure that the air supply is not attached to the angle grinder motor.
4.2.2
Ensure that the eccentric pillars (parts 23 & 24) are correctly adjusted. They are set to
reduce backlash and allow free movement of the grinding head along the rail. These are
preset on new machines.
4.2.3
Ensure that the correct grade and size of grinding of disc (part 42) is fitted to the angle
grinder. This is factory supplied.
4.2.4
Ensure that the grinding disc (part 42) is concentric with the disc holder (part 41). This is
factory set.
4.2.5
Ensure that the grinding disc (part 42) is securely attached and that neither the disc nor the
disc holder (part 41) are damaged.
4.2.6
Ensure that the angle grinder (part 40) is securely attached to the carriage. Check that the
disc is set between the reel pins (part 39) and is free to rotate.
© Bernhard and Company Limited
Mounting plates
and Magnet support
brackets
RAPID FACER MANUAL
M6 C'S'K
socket
screws
Rail
6