GAPOSA QC101 Operation Instructions Manual - Page 9
Browse online or download pdf Operation Instructions Manual for Control Unit GAPOSA QC101. GAPOSA QC101 16 pages. Single-phase control unit
Print Page
INTEGRATED COURTESY LIGHT
The courtesy lamp contact will activate ifself, after an opening input,
once the door is completely closed and the operation time over.
The contact of the courtesy light has two working modes:
• switch on in case of opening and authomatical switch off after 3
minutes
• switch on for two seconds while opening (useful to operate a lighting
system).
In order to switch from one mode to the other, please move the dip 2 on
ON and then on OFF for at least three times
NOTE: you should move consecutively from OFF to ON within 2
seconds, otherwise the number of movements will be reset to
zero).
The leds will inform you about the selected mode:
• Activation of mode 3 minutes: green led ON, red led flashing slowly for
3 seconds
• Activation of mode 2 seconds: green led ON, red led flashing quickly for
3 seconds
In case the courtesy light is matched with a radio code, the transmission
of the command will cause the activation of the relé for 3 minutes
or 2 seconds according to the control unit programming. In case of
transmission of the command with active relé, it will be deactivated.
Max 5 A
13
14
230 V
50-60 Hz