GAPOSA SileoXS XSDC3DX228 Quick Start Manual - Page 7
Browse online or download pdf Quick Start Manual for Window Blinds GAPOSA SileoXS XSDC3DX228. GAPOSA SileoXS XSDC3DX228 8 pages. Ultra quiet motorization
Print Page9. SETTING THE LIMITS INDIVIDUALLY
If the limits need to be changed after the initial limit setting procedure, it is possible to change the limit
positions individually. One limit can be set without the other limit needing to be set. The motor can be in any
postion to initiate the procedure.
TO CHANGE THE
1
From any point between the existing limits, press
and hold both the PROG-FC button and the UP
button until the motor makes a breif jog.
Note: during "limit setting mode" the operations
are in "deadman control" (The UP and DOWN
buttons must be held DOWN inorder to move the
motor.).
TO CHANGE THE
1
From any point between the existing limits, press
and hold both the PROG-FC button and the DOWN
button until the motor makes a breif jog.
Note: during "limit setting mode" the operations
are in "deadman control" (The UP and DOWN
buttons must be held DOWN inorder to move the
motor.).
10. SETTING THE INTERMEDIATE POSITION
1
11. RECALLING THE
INTERMEDIATE POSITION
Press and hold the STOP button
3"
for at least 3 seconds: the shade
will move to the intermediate
position.
UP
LIMIT:
DOWN
LIMIT:
Stop the blind in the
desired intermediate
position
2
Press and hold the
UP botton until the
desired new UP limit
is reached.
2
Press and hold the
DOWN botton until the
desired new DOWN limit
is reached.
2
12. ERASING THE
INTERMEDIATE POSITION
3
Press the STOP button to set
the limit. The motor makes
a brief jog to confirm. The
new up limit is set.
3
Press the STOP button to set
the limit. The motor makes
a brief jog to confirm. The
new up limit is set.
Press both the UP and DOWN
buttons simultaneously until
the motor makes a brief jog in
both directions.
The intermediate position has
been set.
Press both the UP and DOWN
buttons simultaneously until
the motor makes a brief jog
in both directions.
7