IKEA PILSKOTT Manual - Page 4

Browse online or download pdf Manual for Lighting Equipment IKEA PILSKOTT. IKEA PILSKOTT 32 pages.
Also for IKEA PILSKOTT: Getting Started (16 pages)

Print Page

English

Getting started

Connect your product to the mains or plug the

power cable into the wall socket.

If you have the TRÅDFRI gateway or

DIRIGERA hub

Go to App Store or Google Play and download

the IKEA Home smart app. The app will take you

through the process of installing your product and

other devices.

How to steer your lighting

When the product is connected to the mains, it is

possible to turn it ON/OFF with the main switch or

the foot switch, but if you want to dim or connect

your product to other IKEA Home smart products,

you need to buy a separate steering device (e.g. a

remote control).

The steering device needs to be paired with your

wireless product. If you have more than one (1)

wireless product, you can pair each one with the

steering device so that the entire combination can

be turned ON/OFF or dimmed at the same time.

Pairing a steering device to your product

1. Connect at least one (1) product to the mains

before you begin the pairing. Make sure that the

mains power is turned ON.

2. Locate the pairing symbol on the LED driver. Hold

the steering device close to the pairing symbol

(no more than 5 cm away).

3. Press and hold the pairing button on the steering

device for at least 10 seconds. A red LED light will

shine steadily on the steering device. The product

will begin to dim and flash one time to indicate

that it has being paired to the steering device.

How to factory reset your driver

If the product does not respond or if you want to

un-pair the product from a steering device, you

might have to perform a factory reset. The unit is

forced to factory reset by carefully pushing and

holding in the small button (marked RESET) with a

tip of pen on the LED driver enclosure and applying

slight pressure.

A factory reset can also be performed by toggling

the main switch 6 times.

IMPORTANT!

• The product is for indoor use only and can be

used in temperatures ranging from 5 °C to 45 °C.

• Do not leave the product in direct sunlight or near

any heat source, as it may overheat.

• The declared radio range between the unit and

the steering device is measured in open air.

• Different building materials and placement of the

units can affect the wireless connectivity range.

Care instructions

To clean the unit, wipe with a dry soft cloth.

Never use abrasive cleaners or chemical solvents as

this can damage the product.

Technical data:

Type: G2015 PILSKOTT

Input: 220-240 VAC, 50/60 Hz, 14.5 W

Max lumen output: 700lm

Power Supply Unit

Type: ICPSHC24-30-IL44-1

Input: 220-240 VAC, 50/60 Hz, 0.23A

Output: 24.0V DC

Max total load: 1.25 A, 30.0 W

Radio range: 10 m in open air.

Operating frequency: 2400-2483.5 MHz

Output power: 12 dBm

DImension, mm: 220x65x26 mm

Weight: 233 gr

Type of light source(s): LED

Efficiency in full-load: 88 %

No-load power consumption (Pno): 0.24 W

Networked standby power

consumption (Pnet): 0.23 W

Standby power consumption (Psb): N/A

Suitable as dimmer for light sources: Yes

Indoor use only

Manufacturer: IKEA of Sweden AB

(commercial registration number: 556074-7551)

Address: Box 702, SE-343 81 Älmhult, SWEDEN

The crossed-out wheeled bin symbol indicates that

the item should be disposed of separately from

household waste. The item should be handed in for

recycling in accordance with local environmental

regulations for waste disposal. By separating a

marked item from household waste, you will help

reduce the volume of waste sent to incinerators or

land-fill and minimize any potential negative impact

on human health and the environment. For more

information, please contact your IKEA store.