Makita 3606 Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Power Tool Makita 3606. Makita 3606 17 pages. Makita 3606 plunge router: specifications
Also for Makita 3606: Parts Breakdown (2 pages)

Print Page

9. Before using the tool on an actual work-

piece, let it run for a while. Watch for

vibration or wobbling that could indicate

improperly installed bit.

10. Be careful of the bit rotating direction and

the feed direction.

11. Do not leave the tool running. Operate the

tool only when hand-held.

12. Always switch off and wait for the bit to

come to a complete stop before removing

the tool from workpiece.

13. Do not touch the bit immediately after

operation; it may be extremely hot and

could burn your skin.

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety rules stated in this

instruction manual may cause serious personal injury.

14. Always lead the power supply cord away

from the tool towards the rear.

15. Do not smear the tool base carelessly with

thinner, gasoline, oil or the like. They may

cause cracks in the tool base.

16. Draw attention to the need to use cutters

of the correct shank diameter and suitable

for the speed of the tool.

17. Some material contains chemicals which

may be toxic. Take caution to prevent dust

inhalation and skin contact. Follow mate-

rial supplier safety data.