IKEA tradfri Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for Lighting Equipment IKEA tradfri. IKEA tradfri 24 pages. Motion sensor
Also for IKEA tradfri: User Manual (36 pages), Assembly Instructions Manual (36 pages), Assembly Instructions Manual (24 pages), Manual (12 pages), Manual (28 pages), Manual (20 pages), Manual (16 pages), Manual (20 pages), Quick Manual (36 pages), Manual (16 pages), Manual (32 pages), Manual (12 pages), Manual (8 pages), Manual (24 pages), Manual (24 pages), Manual (32 pages), Manual (24 pages), Manual (32 pages), Manual (32 pages), Manual (24 pages), Manual (12 pages), Manual (24 pages), Manual (24 pages), Manual (24 pages), Manual (29 pages), Manual (12 pages), Quick Start Manual (12 pages), Manual (40 pages), Quick Start Manual (16 pages), Manual (16 pages), Manual (24 pages), Manual (32 pages), Quick Start Manual (2 pages), Manual (40 pages), Quick Start Manual (16 pages), Manual (36 pages), Manual (28 pages), Quick Start Manual (2 pages), Manual (32 pages), Manual (32 pages), Manual (24 pages), Instructions Manual (8 pages), Manual (24 pages), Quick Start Manual (4 pages), Manual (8 pages), Manual (20 pages), Manual (12 pages), Manual (8 pages), Manual (32 pages)

Print Page

English

WIRELESS SIGNAL REPEATER FUNCTIONS

With TRÅDFRI signal repeater you can expand the

signal reach of your IKEA Home smart products.

Pairing: Add IKEA Home smart

products to your system.

See instructions below.

ADDING STEERING DEVICE TO

YOUR SIGNAL REPEATER

When the Signal Repeater is sold together with

another IKEA Home smart product (in the same

package), they are already paired.

You cannot add IKEA Home smart products directly

to your signal repeater. A TRÅDFRI steering device is

needed to add them.

To add steering devices, just follow the steps below:

Make sure that your signal repeater is plugged in

and the main power is turned on.

1. Hold the steering device close to the signal

repeater you want to add (no more than 5 cm

away).

2. Press and hold the pairing button for at least 10

seconds , you can find the pairing button under

the rear cover.

3. A red light will shine steadily on the steering

device.

Then go to the product you want to steer and

then repeat the pairing.

On your IKEA Home smart products a white light

will begin to dim and flash one time to indicate that

it has been successfully paired.

FACTORY RESET YOUR DEVICE

For wireless signal repeater:

Push a pin into the pinhole on bottom of the signal

repeater for at least 5 seconds.

After reset the signal repeater you must pair your

steering device to the signal repeater and then

pair the steering device to your IKEA Home smart

product product again.

IMPORTANT!

• The Signal Repeater is for indoor use only and

can be used in temperatures ranging from 0ºC to

40 ºC (32ºF to 104 ºF).

• Do not leave the wireless Signal Repeater in

direct sunlight or near any heat source, as it may

overheat.

• The range between the wireless Signal Repeater

and the receiver are measured in open air.

Different building materials and placement of the

units can affect the wireless connectivity range.

WARNING:

• The wall socket must be located near the

equipment and must be easily accessible.

• Only use in dry locations.

• Children should be supervised to ensure they do

not play with the product.

• If the device is damaged it shall be destroyed.

• Never use a damage or faulty USB cable for

charging, since this can damage the appliance

and harm your device.

TECHNICAL DATA

Type: E1746 wireless Signal Repeater

Input: 5V DC

Range: 10 m in open air

For indoor use only

Operating frequency: 2405-2480MHz