IKEA tradfri Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for Lighting Equipment IKEA tradfri. IKEA tradfri 16 pages. Motion sensor
Also for IKEA tradfri: User Manual (36 pages), Assembly Instructions Manual (36 pages), Assembly Instructions Manual (24 pages), Manual (12 pages), Manual (28 pages), Manual (20 pages), Manual (16 pages), Manual (20 pages), Quick Manual (36 pages), Manual (16 pages), Manual (32 pages), Manual (12 pages), Manual (8 pages), Manual (24 pages), Manual (24 pages), Manual (32 pages), Manual (24 pages), Manual (32 pages), Manual (32 pages), Manual (24 pages), Manual (12 pages), Manual (24 pages), Manual (24 pages), Manual (24 pages), Manual (29 pages), Manual (12 pages), Quick Start Manual (12 pages), Manual (40 pages), Quick Start Manual (24 pages), Manual (16 pages), Manual (24 pages), Manual (32 pages), Quick Start Manual (2 pages), Manual (40 pages), Quick Start Manual (16 pages), Manual (36 pages), Manual (28 pages), Quick Start Manual (2 pages), Manual (32 pages), Manual (32 pages), Manual (24 pages), Instructions Manual (8 pages), Manual (24 pages), Quick Start Manual (4 pages), Manual (8 pages), Manual (20 pages), Manual (12 pages), Manual (8 pages), Manual (32 pages)

Print Page

English

WIRELESS OPEN/CLOSE

REMOTE FUNCTIONS

UP:

Press to move your wireless roller

blind up..

DOWN:

Press to move your wireless roller

blind down.

Pairing: Add IKEA Home smart

products to your system. See

instructions below.

IMPORTANT NOTE: You need the Signal

Repeater to be able to steer your blinds

with the wireless Open/Close remote!

ADDING DEVICES TO YOUR

WIRELESS OPEN/CLOSE REMOTE

When the wireless Open/Close remote

is sold together with a wireless roller

blind and a Signal Repeater (in the same

package), they are already paired.

To add more wireless roller blinds, just

repeat the steps below:

Make sure that your wireless roller blind

is turned on.

1 Open the back cover of the Open/

Close Remote and find the pairing

button.

2 Short press on both buttons on the

blind. This will make the device awake

and ready for pairing for 2 minutes.

3 Hold the Open/Close remote very

close to the wireless roller blind you

want to add: no more than 5 cm away

from

4 Press and hold the pairing button for

at least 10 seconds on the wireless

Open/Close remote.

5 A red light will shine steadily on the

Open/Close remote. On your wireless

roller blind a white light will begin to

dim and flash until the devices have

been successfully paired.

Up to 4 wireless roller blinds can be

paired with 1 Open/Close remote.

Make sure to pair them one at a time.

If you have difficulties paring multiple

blinds, temporarily disconnect those

that have already been paired by

removing the battery cell inside. This

will help with the pairing process.

USING YOUR WIRELESS

ROLLER BLINDS

Move blind up to top position using

Open/Close remote

Press the up button once (short press)

on the Open/Close remote

Move blind down to preset level using

Open/Close remote

Press the down button once (short

press) on the Open/Close remote

Move up blind using

Open/Close remote

Press and hold the up button on the

Open/Close remote

While pressing the button the blind

is raised (until wished position or top

position has been reached), if the

button is release the blinds stop.

Move down blind using

Open/Close remote

Press and hold the down button on the

Open/Close remote